6-CHANNEL INPUT MODULE

This module is used to connect buttons/reed switches.

Connection example

hw="in='T+KBBB'"

hw="in='DDDDD-'"

Module parameters

Parameter name Value
Input channels qty 6
Buttons
LED Buttons
6
5
Backlight voltage 3V
Max current(24V) 30 mA
Power supply 11.5 … 27.5 V DC from CAN
Bus type CAN (4-wire)
Mounting Free
Case material ABS
Protection IP40
Temperature range -10 … +50 °C
Size 45x42x14 mm
Weight 25 g

 

HW Settings

 

Name Type, range SUBID Default Description
in char[16] 98 'BBBBBB' Each char is responsible for the type of a particular channel

  • ‘B’-Button, button of bell a type;
  • ‘C’-Inverted button, inverse button of a bell type (for normally-closed);
  • ‘D’-Backlit button, illuminated button;
  • ‘E’-Inverted backlit button, inverse illuminated button;
  • ‘S’-Switch, fixed switch;
  • ‘H’-Contact, reed contact;
  • ‘K’-Inverted contact, inverse reed contact;
  • ‘G’-GND, is used as earthing;
  • ‘-‘-none, nothing is connected.

And you can also connect one temperature sensor:

hw=”in=’T + – – – -‘”

Example: in=’DEHSSG’

offset float(+/- 0…39) SubID 30 temperature sensor '0' sensor values offset;
For example, offset is -3.8 :

hw="offset='-3.8'"

Input HW configuration

channel 1 2 3 4 5 6
Button
nButton
Switch
Contact
nContact
none
+ + + + + +
LedButton
nLedButton
+ + + + +
Temperature Sensor +

Example:

<item addr="477:13" cfgid="57" name="Switch" type="switch" uniq_id="78"/>
<item addr="477:14" cfgid="57" name="Switch" type="switch" uniq_id="79"/>
<item addr="477:16" cfgid="57" name="Door" type="door-sensor" uniq_id="80"/>
<item addr="477:30" cfgid="57" hw="offset='15'" name="Temperature" type="temperature-sensor" uniq_id="83"/>
<item addr="477:98" cfgid="57" hw="in='T+DD-H'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="76"/>