4-CHANNEL MODULE FOR DEVISES WITH 0-10V INPUT

This module allows connecting devices with 0-10V input interface
to the Smart Home system.

Example of connection.

Module parameters

Parameter name Value
0-10 port quantity 4
Max load per channel 15mA
Power supply 11.5 … 27.5 V DC from CAN
Max current(24V) 55 mA
Bus type CAN (4-wire)
Mounting Free
Case material ABS
Protection IP40
Temperature range -10 … +50 °C
Size 45x42x14 mm
Weight 15 g

Module installation and connection procedure

  1. Connect the interface connector.
  2. Connect the Can connector.
  3. Configure the module using LT setup.
  4. Check all equipment for proper operation.

Module shut-off and deinstallation procedure

  1. Disconnect the CAN connector.
  2. Disconnect the interface connector.

HW Settings

Name Type, range SUBID Default Description
def integer 0-250 1-4 100 The default brightness level in case of a power reset (1..250). Example: def=250
min integer 0-100 1-4 0 Minimum dimming level, example: min=10
max integer 0-100 1-4 100 Maximum dimming level, example max=95
start integer 0-100 1-4 0 The Start function is used for lamps that lack the minimal voltage to get turned on. If the set value is lower than the start value, the lamp is turned on at the start value and them the light is dimmed down to the set level. Example: start=60
force integer 0-100 1-4 10 Time duration of the starting value (measured in milliseconds). Example: force=20
runtime integer 0-60000 1-4 1000 Runtime is the speed of changing the brightness from ‘min’ to ‘max’ (measured in milliseconds). Example: runtime=1000
dm char[4] 98 ‘vvvv’ Each char is responsible for the type of a particular channel

  • ‘g’ – use like halogen dimmer-lamp
  • ‘s’ – Soft Switch, lamp, when on/off power is supplied/deenergised smoothly (500msec)
  • ‘k’ – Switch, lamp, when on/off power is supplied/deenergised immediately
  • ‘l’ – LED Function, dimmable LED lamps
  • ‘v’ – linear Function of dimming
  • ‘-‘ – Channel disabled
  • ‘+’ – Regular channel
  • Example: dm=’skl-‘

Example:

<item addr="30:1" auto-period="600" cfgid="71" name="Dimmer" type="dimer-lamp" uniq_id="92"/>
<item addr="30:2" auto-period="600" cfgid="71" name="Dimmer" type="dimer-lamp" uniq_id="93"/>
<item addr="30:3" auto-period="600" cfgid="71" name="Dimmer" type="dimer-lamp" uniq_id="94"/>
<item addr="30:4" auto-period="600" cfgid="71" name="Dimmer" type="dimer-lamp" uniq_id="95"/>
<item addr="30:98" cfgid="71" name="Temperature" system="yes" type="temperature-sensor" uniq_id="96"/>