Translations:Metaforsa2 MFC-14/71/en

From Larnitech wiki page
Jump to navigation Jump to search
  1. Install the module in the switchboard on the DIN-rail and fix it with the special latch on the module base.
  2. Fasten the supply unit on the left side of the module.
  3. Connect the connector (4) having the noise filter pre-installed which is supplied complete with the module.
  4. Connect the connectors (5), (6).
  5. Connect the connectors (1), (2).
  6. Connect the connector (3).
  7. Apply power to the supply unit of METAFORSA module.
  8. Wait until the module is loaded, then configure it in accordance with the System Setup Instructions.
  9. Apply power to the connectors (1), (2).
  10. Check all equipment for proper operation.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:Metaforsa2_MFC-14/71/en&oldid=3186"