BW-NA

NEST ADAPTER

This module is an adapter for connecting NEST thermostat (US version only) to the Smart Home system.

CAUTION!

The BW-NA module supports only US version of NEST.

All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.

To avoid the risk of fire, electric shock, damage to the system and/or personal injury, the system installation and assembly must be performed in accordance with the instructions listed below:

use appropriate tools and personal protection against electric shock;
do not use damaged cables, wires and connectors;
avoid folding the cables and wires;
do not apply excessive force to the wires by kinking or pressing them too hard: the inner conductors of the cables and wires may get stripped or damaged;
do not exceed the load limit parameters specified in the manual;

When the power is on, NEVER:

connect/disconnect the connectors;
open modules and sensors.

Connection example

Module parameters

Parameter name	Value
Input channels qty	5
Output	24 V AC
Power supply	23 … 25 V DC from CAN
Max current(24V)	70 mA
Bus type	CAN (4-wire)
Mounting	Free
Case material	ABS
Protection	IP40
Temperature range	-10 … +50 °C
Size	45x42x14 mm
Weight	15 g

Language:

NEST ADAPTER

Connection example

Module parameters