ON-THE-FLOOR LEAKAGE SENSOR

The sensor is placed on the floor surface. It has an alarm light, which
changes from green to red if the sensor detects water on the floor.
Used together with DW-WL02 or BW-LSA modules.

Example of connection

Connectors

Module parameters

Parameter name Value
Power supply 9-12 V DC
Max current 20 mA
Compatible with MF-10
DW-WL02/HTxx
BW-LSA
Mounting Free
Case material ABS
Protection IP64
Temperature range -10 … +50 °C
Size 57x47x22 mm
Weight 35 g

HW settings

Name Type, range SUBID Default Description
c0 int[4] sensors subId 0;0;255;15 Normal state color in format ‘red;green;blue;blink’
red, green, blue – 0..255;
blink:

  • 0 – pulse
  • 1 – blink per 2 seconds
  • 2 – blink per second
  • 15 – constant glow

Example:

c0='0;0;255;15'
c1 int[4] sensors subId 0;0;255;15 On-start color in format ‘red;green;blue;blink’
red, green, blue – 0..255;
blink:

  • 0 – pulse
  • 1 – blink per 2 seconds
  • 2 – blink per second
  • 15 – constant glow

Example:

c1='0;0;255;15'
c2 int[4] sensors subId 255;100;0;15 ‘Leak was previously reported’ color in format ‘red;green;blue;blink’
red, green, blue – 0..255;
blink:

  • 0 – pulse
  • 1 – blink per 2 seconds
  • 2 – blink per second
  • 15 – constant glow

Example:

c2='255;100;0;15'
c3 int[4] sensors subId 255;0;0;15 On-leak color in format ‘red;green;blue;blink’
red, green, blue – 0..255;
blink:

  • 0 – pulse
  • 1 – blink per 2 seconds
  • 2 – blink per second
  • 15 – constant glow

Example:

c3='255;0;0;15'
sens int sensors subId 180 Sensor sensitivity
Example:

sens='180'

* Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly.
* Green and blue cannot be used at the same time. Green has priority.