WW-THERM

WW-THERM
WW-THERM
Control parameters
Sensors
Control parameters	Температура, фанкойл
Supply voltage
Other
Supply voltage	Шина CAN

Other languages:

English • ‎русский

НАСТЕННЫЙ ТЕРМОСТАТ

WW-THERM — настенный термостат с экраном для управления термостатом и 4 сенсорными кнопками. Подключается к шине CAN.

Экран для управления термостатом (уставка температуры, режим).
4 сенсорные кнопки для сценариев, штор и других элементов.
Встроенный датчик температуры.
Вход для внешнего датчика температуры (например, датчика пола).
4 реле для управления фанкойлом.
RGB-подсветка светодиодом с настраиваемым цветом и яркостью.
Цвета: чёрный, золотой, белый.

Module parameters

Parameter name	Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs
Number of dry contact inputs
RS485 ports qty
RS232 ports qty
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty
Output channels qty
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type
Supported sensors
Input voltage
Current type
Adjustment type
Max load
Min load
Max load per channel
Max load per group
Max load per device
Control parameters	Temperature, fancoil
Angle of vision IR	°
Angle of motion	°
Temperature measuring range	°C
Humidity measuring range
Dimmer type
Dimming type
Voltage that may be applied to the input channels
Max output switching voltage
Max output switching current
Power supply
Max current(24V)
Max current(13V)
Max detection distance
Max IR distance
Max BT distance
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output
Sensors max VCC current
R1-R2 inputs max current
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length
Bus type	CAN
Compatible with
Output voltage
Output current
Equipment installation type	Wall
Mounting
Max cabel lenght
Case material
Protection
Temperature range	°C
Size
Weight

Items

SUBID	Type	Description
30	temperature-sensor	Built-in temperature sensor
31	temperature-sensor	External temperature sensor
98	temperature-sensor (system)	HW settings of the module

HW settings

Name	Type, range	SUBID	Default	Description
center	char (r, g, b, p, y, c, w)	98		Backlight color: r – red, g – green, b – blue, p – purple, y – yellow, c – cyan, w – white. Example: 1hw="center='g'"
bright	int (0…250)	98		Backlight brightness. Example: 1hw="bright='120'"
offset	float (-99…99, step 0.1)	30, 31	0	Offset of the sensor value. Example: 1hw="offset='-1.5'"

Example:

1<item addr="512:30" cfgid="200" name="Temperature" type="temperature-sensor" hw="offset='-1.5'"/>
2<item addr="512:31" cfgid="200" name="Floor temperature" type="temperature-sensor"/>
3<item addr="512:98" cfgid="200" name="Temperature" system="yes" type="temperature-sensor" hw="center='g' bright='120'"/>