WW-THERM
From Larnitech wiki page
Jump to navigation
Jump to search
| WW-THERM |
|---|
 |
|
| Control parameters | Температура, фанкойл |
|---|
|
|
НАСТЕННЫЙ ТЕРМОСТАТ
WW-THERM — настенный термостат с экраном для управления термостатом и 4 сенсорными кнопками. Подключается к шине CAN.
- Экран для управления термостатом (уставка температуры, режим).
- 4 сенсорные кнопки для сценариев, штор и других элементов.
- Встроенный датчик температуры.
- Вход для внешнего датчика температуры (например, датчика пола).
- 4 реле для управления фанкойлом.
- RGB-подсветка светодиодом с настраиваемым цветом и яркостью.
- Цвета: чёрный, золотой, белый.
Параметры модуля
| Parameter name |
Value
|
| Input channels qty |
|
| Input/output channels qty |
|
| 0-10 input port quantity |
|
| Buttons |
|
| LED Buttons |
|
| Number of sensor inputs |
|
| Number of dry contact inputs |
|
| RS485 ports qty |
|
| RS232 ports qty |
|
| UART ports qty |
|
| M-BUS port quantity |
|
| Pulse inputs quantity |
|
| DALI ports qty |
|
| DALI-line voltage supply |
|
| Peak current of DALI-line power supply |
|
| Peak current in DALI-line |
|
| Maximum DALI devices quantity |
|
| Dimming channels qty |
|
| Output channels qty |
|
| 0-10 output port quantity |
|
| Analog output channels qty |
|
| Output |
|
| Digital line maximum length |
|
| Discrete input channels qty |
|
| Digital input channels qty |
|
| Speakers |
|
| Max power output audio channel |
|
| Camera |
|
| IR lighting |
|
| Card reader |
|
| Connection type |
|
| Protocols |
|
| Backlight voltage |
|
| Load type |
|
| Dimmer load type |
|
| Supported sensors |
|
| Input voltage |
|
| Current type |
|
| Adjustment type |
|
| Max load |
|
| Min load |
|
| Max load per channel |
|
| Max load per group |
|
| Max load per device |
|
| Control parameters |
Температура, фанкойл
|
| Angle of vision IR |
°
|
| Angle of motion |
°
|
| Temperature measuring range |
°C
|
| Humidity measuring range |
|
| Dimmer type |
|
| Dimming type |
|
| Voltage that may be applied to the input channels |
|
| Max output switching voltage |
|
| Max output switching current |
|
| Power supply |
|
| Max current(24V) |
|
| Max current(13V) |
|
| Max detection distance |
|
| Max IR distance |
|
| Max BT distance |
|
| Max current |
|
| Relay |
|
| Data transfer speed |
|
| Permissible section of power supply cable to connect in socket: |
|
| Sensors VCC output |
|
| Sensors max VCC current |
|
| R1-R2 inputs max current |
|
| Push-button/reed switches line recommended length |
|
| Temperature sensor line max length |
|
| Sensor cable length |
|
| Sensors line max length |
|
| Bus type |
CAN
|
| Compatible with |
|
| Output voltage |
|
| Output current |
|
| Equipment installation type |
На стену
|
| Mounting |
|
| Max cabel lenght |
|
| Case material |
|
| Protection |
|
| Temperature range |
°C
|
| Size |
|
| Weight |
|
* -
** -
*** -
1 -
2 -
3 -
Элементы
| SUBID |
Тип |
Описание
|
| 30 |
temperature-sensor |
Встроенный датчик температуры
|
| 31 |
temperature-sensor |
Внешний датчик температуры
|
| 98 |
temperature-sensor (системный) |
HW-настройки модуля
|
HW settings
| Name |
Type, range |
SUBID |
Default |
Description
|
| center |
char (r, g, b, p, y, c, w) |
98 |
|
Backlight color: r – red, g – green, b – blue, p – purple, y – yellow, c – cyan, w – white. Example:
|
| bright |
int (0…250) |
98 |
|
Backlight brightness. Example:
|
| offset |
float (-99…99, step 0.1) |
30, 31 |
0 |
Offset of the sensor value. Example:
|
Example:
1<item addr="512:30" cfgid="200" name="Temperature" type="temperature-sensor" hw="offset='-1.5'"/>
2<item addr="512:31" cfgid="200" name="Floor temperature" type="temperature-sensor"/>
3<item addr="512:98" cfgid="200" name="Temperature" system="yes" type="temperature-sensor" hw="center='g' bright='120'"/>