Difference between revisions of "Translations:DW-HT07.A/38/en"

From Larnitech wiki page
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 11:08, 3 February 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (DW-HT07.A)
#Connect the outputs.
#Connect the inputs.
#Connect the Can connector.
#Configure the module using LT setup.
#Apply power to the load
#Check all equipment for proper operation.
Translation#Connect the outputs.
#Connect the inputs.
#Connect the Can connector.
#Configure the module using LT setup.
#Apply power to the load
#Check all equipment for proper operation.
  1. Connect the outputs.
  2. Connect the inputs.
  3. Connect the Can connector.
  4. Configure the module using LT setup.
  5. Apply power to the load
  6. Check all equipment for proper operation.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:DW-HT07.A/38/en&oldid=10406"