Difference between revisions of "Translations:DW-HC10/25/en"

From Larnitech wiki page
Jump to navigation Jump to search
(Importing a new version from external source)
 
(Importing a new version from external source)
Tags: Mobile web edit Mobile edit
 
Line 19: Line 19:
 
|out||char[10]||98||'HHHHHHHHHH'||Each char is responsible for the type of a particular channel
 
|out||char[10]||98||'HHHHHHHHHH'||Each char is responsible for the type of a particular channel
 
*'D'- PWM output (frequency 0.4Hz);
 
*'D'- PWM output (frequency 0.4Hz);
 +
*'С'- Fancoil dimmer;
 
*'L'-Lamp;
 
*'L'-Lamp;
 
*'M'-Lamp Inverse;
 
*'M'-Lamp Inverse;

Latest revision as of 09:24, 14 February 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (DW-HC10)
==HW settings==
{| class="wikitable"
|-
!Name!!Type, range!!SUBID!!Default!!Description
|-
|-
|def||string||1-10||'OFF'||Def is the element status is set after restart, is used for lamp, heating, valve(1 pole);
Set 'last' saved state of the element in case of a power reset. The element save his state after stay unchanged for 10 minutes.
Example:
def='ON'
def='last'
|-
|offset||integer -39 – 39||31-42||0||It is the sensor values offset; Example: offset='-1.2'
|-
|mode||string||98||'AС'||Output operatoin mode:
*'AС' – 220V AC
*'DC' – DC current
|-
|out||char[10]||98||'HHHHHHHHHH'||Each char is responsible for the type of a particular channel
*'D'- PWM output (frequency 0.4Hz);
*'С'- Fancoil dimmer;
*'L'-Lamp;
*'M'-Lamp Inverse;
*'J'-Heating NO, valve-heating, normally open;
*'H'-Heating NC, valve-heating, normally closed;
*'V'-Valve (2 pole), 2 pole valve;
*'W'-Valve (2 pole) Inverse, 2 pole valve, invert open-close;
*'R'-Valve (1 pole), 1 pole valve,;
*'S'-Valve (1 pole) Inverse, 1 pole valve, invert open-close;
*'K'-Lock (short press);
*'N'-Lock (short press) Inverse;
*'F'-FanCoil. Group1 (Lamp Toggle). For fancoil speed control;
*'E'-FanCoil. Group2 (Lamp Toggle). For fancoil speed control;
*'Q'-FanCoil. Group3 (Lamp Toggle). For fancoil speed control;
*'U'-FanCoil. Group4 (Lamp Toggle). For fancoil speed control;
*'I'-FanCoil. Group5 (Lamp Toggle). For fancoil speed control;
*'-'-none, nothing is connected.
Example: out='BGLKMVX'
|-
|in||char[12]||98||'++++++++++++'||Each char is responsible for the type of a particular channel
*'D'-DS18B20 digital sensor;
*'R'-Analogue temperature sensor;
*'+'-Autodetection;
*'-'Not used;
Example: out='+DR+R–R+RD+'
|-
|r||int||31-42||'10000'||Analogue temperature sensor`s resistance on 25 °C.
Example: r='8000'
|}
Translation==HW settings==
{| class="wikitable"
|-
!Name!!Type, range!!SUBID!!Default!!Description
|-
|-
|def||string||1-10||'OFF'||Def is the element status is set after restart, is used for lamp, heating, valve(1 pole);
Set 'last' saved state of the element in case of a power reset. The element save his state after stay unchanged for 10 minutes.
Example:
def='ON'
def='last'
|-
|offset||integer -39 – 39||31-42||0||It is the sensor values offset; Example: offset='-1.2'
|-
|mode||string||98||'AС'||Output operatoin mode:
*'AС' – 220V AC
*'DC' – DC current
|-
|out||char[10]||98||'HHHHHHHHHH'||Each char is responsible for the type of a particular channel
*'D'- PWM output (frequency 0.4Hz);
*'С'- Fancoil dimmer;
*'L'-Lamp;
*'M'-Lamp Inverse;
*'J'-Heating NO, valve-heating, normally open;
*'H'-Heating NC, valve-heating, normally closed;
*'V'-Valve (2 pole), 2 pole valve;
*'W'-Valve (2 pole) Inverse, 2 pole valve, invert open-close;
*'R'-Valve (1 pole), 1 pole valve,;
*'S'-Valve (1 pole) Inverse, 1 pole valve, invert open-close;
*'K'-Lock (short press);
*'N'-Lock (short press) Inverse;
*'F'-FanCoil. Group1 (Lamp Toggle). For fancoil speed control;
*'E'-FanCoil. Group2 (Lamp Toggle). For fancoil speed control;
*'Q'-FanCoil. Group3 (Lamp Toggle). For fancoil speed control;
*'U'-FanCoil. Group4 (Lamp Toggle). For fancoil speed control;
*'I'-FanCoil. Group5 (Lamp Toggle). For fancoil speed control;
*'-'-none, nothing is connected.
Example: out='BGLKMVX'
|-
|in||char[12]||98||'++++++++++++'||Each char is responsible for the type of a particular channel
*'D'-DS18B20 digital sensor;
*'R'-Analogue temperature sensor;
*'+'-Autodetection;
*'-'Not used;
Example: out='+DR+R–R+RD+'
|-
|r||int||31-42||'10000'||Analogue temperature sensor`s resistance on 25 °C.
Example: r='8000'
|}

HW settings

Name Type, range SUBID Default Description
def string 1-10 'OFF' Def is the element status is set after restart, is used for lamp, heating, valve(1 pole);

Set 'last' saved state of the element in case of a power reset. The element save his state after stay unchanged for 10 minutes. Example: def='ON' def='last'

offset integer -39 – 39 31-42 0 It is the sensor values offset; Example: offset='-1.2'
mode string 98 'AС' Output operatoin mode:
  • 'AС' – 220V AC
  • 'DC' – DC current
out char[10] 98 'HHHHHHHHHH' Each char is responsible for the type of a particular channel
  • 'D'- PWM output (frequency 0.4Hz);
  • 'С'- Fancoil dimmer;
  • 'L'-Lamp;
  • 'M'-Lamp Inverse;
  • 'J'-Heating NO, valve-heating, normally open;
  • 'H'-Heating NC, valve-heating, normally closed;
  • 'V'-Valve (2 pole), 2 pole valve;
  • 'W'-Valve (2 pole) Inverse, 2 pole valve, invert open-close;
  • 'R'-Valve (1 pole), 1 pole valve,;
  • 'S'-Valve (1 pole) Inverse, 1 pole valve, invert open-close;
  • 'K'-Lock (short press);
  • 'N'-Lock (short press) Inverse;
  • 'F'-FanCoil. Group1 (Lamp Toggle). For fancoil speed control;
  • 'E'-FanCoil. Group2 (Lamp Toggle). For fancoil speed control;
  • 'Q'-FanCoil. Group3 (Lamp Toggle). For fancoil speed control;
  • 'U'-FanCoil. Group4 (Lamp Toggle). For fancoil speed control;
  • 'I'-FanCoil. Group5 (Lamp Toggle). For fancoil speed control;
  • '-'-none, nothing is connected.

Example: out='BGLKMVX'

in char[12] 98 '++++++++++++' Each char is responsible for the type of a particular channel
  • 'D'-DS18B20 digital sensor;
  • 'R'-Analogue temperature sensor;
  • '+'-Autodetection;
  • '-'Not used;

Example: out='+DR+R–R+RD+'

r int 31-42 '10000' Analogue temperature sensor`s resistance on 25 °C.

Example: r='8000'