Larnitech wiki page

Changes

BT-CAN (view source)

Revision as of 12:59, 23 October 2023

1,066 bytes removed ,  12:59, 23 October 2023
no edit summary
Line 12: Line 12:     
<!--T:3-->
 
<!--T:3-->
−
This module is used to connect buttons/reed switches.
+
This module is used to connect to remote devices via Bluetooth.
   −
==Features== <!--T:4-->
+
==Overview== <!--T:6-->
−
*5 inputs support:
  −
**Buttons
  −
**Switches
  −
**Reed switches
  −
**LED buttons
  −
**Digital temperature sensor
     −
==Example of connection== <!--T:5-->
+
<!--T:7-->
 +
[[File:BTCAN_VIEW.png|300px]]
   −
<!--T:6-->
+
==Broadcast connection== <!--T:4-->
−
[[File:SW06C EXA.png|500px]]
+
[[File:BTCAN_connection_Mash.png|500px]]
−
<br>
+
 
−
<br>
+
==Point-to-point connection== <!--T:4-->
−
[[File:SW06C EXA2.jpg|500px]]
+
[[File:BTCAN_connection_P2P.png|500px]]
    
==Module parameters== <!--T:7-->
 
==Module parameters== <!--T:7-->
Line 34: Line 29:  
<!--T:8-->
 
<!--T:8-->
 
{{ Mp
 
{{ Mp
−
| inqty          = 6
+
| power          = 11.5 … 27.5 V DC from CAN or PS
−
| buttons        = 6
+
| maxcur24v      = ??? mA
−
| ledbuttons      = 5
+
| maxbtd          = 220 m
−
| blvoltage      = 3V
  −
| power          = 11.5 … 27.5 V DC from CAN
  −
| maxcur24v      = 30 mA
  −
| tsmaxlen        = 10m
   
| bustype        = CAN (4-wire)
 
| bustype        = CAN (4-wire)
 
| instalation    = Free
 
| instalation    = Free
Line 49: Line 40:  
| weight          = 25 g
 
| weight          = 25 g
 
}}
 
}}
−
  −
==Module installation and connection procedure== <!--T:9-->
  −
  −
<!--T:10-->
  −
#Connect the inputs.
  −
#Connect the CAN connector.
  −
#Configure the module using LT setup.
  −
#Check all equipment for proper operation.
  −
  −
==Module shut-off and deinstallation procedure== <!--T:11-->
  −
  −
<!--T:12-->
  −
#Disconnect the CAN connector.
  −
#Disconnect the inputs.
  −
      
==HW settings== <!--T:13-->
 
==HW settings== <!--T:13-->
Line 70: Line 46:  
!Name!!Type, range!!SUBID!!Default!!Description
 
!Name!!Type, range!!SUBID!!Default!!Description
 
|-
 
|-
−
|in||char[16]||98||'BBBBBB'||Each char is responsible for the type of a particular channel
+
|slave||char[10]||98||-||Sn of slave BT-CAN module in hex format for P2P connection. Setting for master BT-CAN/DE-MG.Plus module only
−
*'B'-Button, button of bell a type;
+
Example:
−
*'C'-Inverted button, inverse button of a bell type (for normally-closed);
+
<syntaxhighlight lang="xml" line>hw="slave=0xe8245161"</syntaxhighlight>
−
*'D'-Backlit button, illuminated button;
  −
*'E'-Inverted backlit button, inverse illuminated button;
  −
*'S'-Switch, fixed switch;
  −
*'K'-Contact, reed contact;
  −
*'H'-Inverted contact, inverse reed contact;
  −
*'G'-GND, is used as earthing;
  −
*'-'-none, nothing is connected.
  −
And you can also connect one temperature sensor:
  −
<syntaxhighlight lang="xml" line>hw="in='T-----'"</syntaxhighlight>
  −
<syntaxhighlight lang="xml" line>Example: in='DEHSSG'</syntaxhighlight>
   
|-
 
|-
−
|offset||float(+/- 0…39)||SubID 30 temperature sensor||'0'||sensor values offset;
+
|pin||integer 1-999999||98||-||Pin for P2P connection, must be same for master and slave
−
For example, offset is -3.8 :
+
Example:
−
<syntaxhighlight lang="xml" line>hw="offset='-3.8'"</syntaxhighlight>
+
<syntaxhighlight lang="xml" line>hw="pin=1111"</syntaxhighlight>
 +
|-
 +
|mi-temp1||char[12]||98||-||Sn of Xiaomi temperature/humidity sensor for broadcast connection.
 +
Example:
 +
<syntaxhighlight lang="xml" line>hw="mi-temp1='A4C218FEBA4C'"</syntaxhighlight>
 
|}
 
|}
    
==Input HW configuration== <!--T:14-->
 
==Input HW configuration== <!--T:14-->
−
{| class="wikitable"
+
 
−
|-
  −
!chanel!!1!!2!!3!!4!!5!!6
  −
|-
  −
|Button<br>nButton<br>Switch<br>Contact<br>nContact<br>none||+||+||+||+||+||+
  −
|-
  −
|LedButton<br>nLedButton||+||+||+||+||+
  −
|-
  −
|Temperature Sensor||+||||||||||
  −
|}
      
<!--T:15-->
 
<!--T:15-->
 
<syntaxhighlight lang="xml" line>
 
<syntaxhighlight lang="xml" line>
−
<item addr="477:13" cfgid="180" name="Switch" type="switch" uniq_id="78"/>
+
<item addr="866:98" cfgid="150" hw="slave=0xe8145261 pin=1111" logic-ver="19" name="Temperature" sn="306598234" system="yes" type="temperature-sensor"/>
−
<item addr="477:14" cfgid="180" name="Switch" type="switch" uniq_id="79"/>
+
<item addr="810:98" cfgid="150" hw="mi-temp1='A4C328FEBA3C'" logic-ver="19" name="Temperature" sn="881628906" system="yes" type="temperature-sensor"/>
−
<item addr="477:16" cfgid="180" name="Door" type="door-sensor" uniq_id="80"/>
  −
<item addr="477:30" cfgid="180" hw="offset='15'" name="Temperature" type="temperature-sensor" uniq_id="83"/>
  −
<item addr="477:98" cfgid="180" hw="in='T+DD-H'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="76"/>
   
</syntaxhighlight>
 
</syntaxhighlight>
 
</translate>
 
</translate>
Support
editor, Interface administrators, Administrators, translation-admin, translator
9,750

edits

Retrieved from "https://wiki.larnitech.com/Special:MobileDiff/10961...11169"