editor, Interface administrators, Administrators, translation-admin, translator
9,750
edits
Changes
Jump to navigation
Jump to search
Line 19:
Line 19: − + − + − + Line 40:
Line 40: − − ==Module installation and connection procedure== <!--T:9--> Line 48:
Line 46: − + − *'B'-Button, button of bell a type;+ − *'C'-Inverted button, inverse button of a bell type (for normally-closed);+ − *'D'-Backlit button, illuminated button;+ − *'E'-Inverted backlit button, inverse illuminated button;+ − *'S'-Switch, fixed switch;+ − *'K'-Contact, reed contact;+ − *'H'-Inverted contact, inverse reed contact; − *'G'-GND, is used as earthing; − *'-'-none, nothing is connected. − And you can also connect one temperature sensor: − − − + − For example, offset is -3.8 :+ − + Line 72:
Line 64: − + − <item addr="477:14" cfgid="180" name="Switch" type="switch" uniq_id="79"/>+ − <item addr="477:16" cfgid="180" name="Door" type="door-sensor" uniq_id="80"/> − − <item addr="477:98" cfgid="180" hw="in='T+DD-H'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="76"/>
no edit summary
[[File:BTCAN_VIEW.png|300px]]
[[File:BTCAN_VIEW.png|300px]]
==Mash connection== <!--T:4-->
==Broadcast connection== <!--T:4-->
[[File:BTCAN_connection_Mash.png|300px]]
[[File:BTCAN_connection_Mash.png|500px]]
==Point-to-point connection== <!--T:4-->
==Point-to-point connection== <!--T:4-->
[[File:BTCAN_connection_P2P.png|300px]]
[[File:BTCAN_connection_P2P.png|500px]]
==Module parameters== <!--T:7-->
==Module parameters== <!--T:7-->
| weight = 25 g
| weight = 25 g
}}
}}
==HW settings== <!--T:13-->
==HW settings== <!--T:13-->
!Name!!Type, range!!SUBID!!Default!!Description
!Name!!Type, range!!SUBID!!Default!!Description
|-
|-
|in||char[16]||98||'BBBBBB'||Each char is responsible for the type of a particular channel
|slave||char[10]||98||-||Sn of slave BT-CAN module in hex format for P2P connection. Setting for master BT-CAN/DE-MG.Plus module only
Example:
<syntaxhighlight lang="xml" line>hw="slave=0xe8245161"</syntaxhighlight>
|-
|pin||integer 1-999999||98||-||Pin for P2P connection, must be same for master and slave
Example:
<syntaxhighlight lang="xml" line>hw="pin=1111"</syntaxhighlight>
<syntaxhighlight lang="xml" line>hw="in='T-----'"</syntaxhighlight>
<syntaxhighlight lang="xml" line>Example: in='DEHSSG'</syntaxhighlight>
|-
|-
|offset||float(+/- 0…39)||SubID 30 temperature sensor||'0'||sensor values offset;
|mi-temp1||char[12]||98||-||Sn of Xiaomi temperature/humidity sensor for broadcast connection.
Example:
<syntaxhighlight lang="xml" line>hw="offset='-3.8'"</syntaxhighlight>
<syntaxhighlight lang="xml" line>hw="mi-temp1='A4C218FEBA4C'"</syntaxhighlight>
|}
|}
<!--T:15-->
<!--T:15-->
<syntaxhighlight lang="xml" line>
<syntaxhighlight lang="xml" line>
<item addr="477:13" cfgid="180" name="Switch" type="switch" uniq_id="78"/>
<item addr="866:98" cfgid="150" hw="slave=0xe8145261 pin=1111" logic-ver="19" name="Temperature" sn="306598234" system="yes" type="temperature-sensor"/>
<item addr="810:98" cfgid="150" hw="mi-temp1='A4C328FEBA3C'" logic-ver="19" name="Temperature" sn="881628906" system="yes" type="temperature-sensor"/>
<item addr="477:30" cfgid="180" hw="offset='15'" name="Temperature" type="temperature-sensor" uniq_id="83"/>
</syntaxhighlight>
</syntaxhighlight>
</translate>
</translate>