Difference between revisions of "Translations:Quick Start Guide/55/da"

From Larnitech wiki page
Jump to navigation Jump to search
(Created page with "Hvis forbindelsen ikke oprettes automatisk efter installation og start af applikationen, skal du oprette forbindelse til Wi-Fi-netværket 'Larnitech_case_5G' ved hjælp af din...")
 
(No difference)

Latest revision as of 07:13, 2 November 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Quick Start Guide)
If after installing and starting the application the connection does not get established automatically, you will need to connect to Wi-Fi network ‘Larnitech_case_5G’ with the help of your mobile device. Then start the application and scan the first QR code in the ‘Connections’ section
You may need to turn off data transmission on your mobile device if the demonstration set is not connected to the Internet.
[[File:DemoCase6.png|1000x800px]]
<hr>
TranslationHvis forbindelsen ikke oprettes automatisk efter installation og start af applikationen, skal du oprette forbindelse til Wi-Fi-netværket 'Larnitech_case_5G' ved hjælp af din mobile enhed. Start derefter applikationen, og scan den første QR-kode i afsnittet 'Connections'.
Det kan være nødvendigt at slå dataoverførsel fra på din mobile enhed, hvis demonstrationssættet ikke er forbundet til internettet.
[[File:DemoCase6.png|1000x800px]]
<hr>

Hvis forbindelsen ikke oprettes automatisk efter installation og start af applikationen, skal du oprette forbindelse til Wi-Fi-netværket 'Larnitech_case_5G' ved hjælp af din mobile enhed. Start derefter applikationen, og scan den første QR-kode i afsnittet 'Connections'. Det kan være nødvendigt at slå dataoverførsel fra på din mobile enhed, hvis demonstrationssættet ikke er forbundet til internettet. DemoCase6.png