Difference between revisions of "EW-WL.B"
Jump to navigation
Jump to search
(Created page with "{{RevisionChanger | hasA = 1 | hasB = 1}} {{Infobox module | name = EW-WL.B | image = EW-WLB.jpg | voltage = 9-12 V DC | dim = 18x18x20 mm }} ==BUILT-IN...") |
|||
Line 14: | Line 14: | ||
==Pin assignment== | ==Pin assignment== | ||
− | [[File:EWWLB PIN. | + | [[File:EWWLB PIN.jpg|300px]] |
==Example of connection== | ==Example of connection== | ||
− | [[File:EWWLB EXA. | + | [[File:EWWLB EXA.jpg|400px]] |
==Module parameters== | ==Module parameters== |
Revision as of 13:49, 17 August 2021
EW-WL.B | |||||||
---|---|---|---|---|---|---|---|
|
BUILT-IN FLOOR LEAKAGE SENSOR
Water leakage sensor with an alarm light, mountable in the floor surface. Used together with DW-WL02 or BW-LSA modules.
Pin assignment
Example of connection
Module parameters
Parameter name | Value |
---|---|
Power supply | 9-12 V DC |
Max current(24V) | 20 mA |
Compatible with | MF-10 DW-WL02/HTxx BW-LSA |
Equipment installation type | Built into the floor |
Case material | stainless steel |
Protection | IP65 |
Temperature range | -10 … +50 °C |
Size | 18x18x20 mm |
Weight | 20g |
HW settings
Name | Type, range | SUBID | Default | Description |
---|---|---|---|---|
c0 | int[4] | sensors subId | 0;0;255;15 | Normal state color in format 'red;green;blue;blink'
red, green, blue – 0..255; blink:
Example: 1c0='150;150;255;0'
|
c1 | int[4] | sensors subId | 0;0;255;15 | On-start color in format 'red;green;blue;blink'
red, green, blue – 0..255; blink:
Example: 1c1='150;150;255;0'
|
c2 | int[4] | sensors subId | 255;100;0;15 | 'Leak was previously reported' color in format 'red;green;blue;blink'
red, green, blue – 0..255; blink:
Example: 1c2='150;150;255;0'
|
c3 | int[4] | sensors subId | 255;0;0;15 | On-leak color in format 'red;green;blue;blink'
red, green, blue – 0..255; blink:
Example: 1c3='150;150;255;0'
|
sens | int | sensors subId | 128 | Sensor sensitivity
Example: 1sens='180'
|
- Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly.