Difference between revisions of "FW-FT"
		
		
		
		
		
		Jump to navigation
		Jump to search
		
				
		
		
	
 (Created page with "{{Infobox module | name       = FW-FT | image      = FW-FT.png | cp         = Temperature | temperature= -20 … +60°C | voltage    = 11.5...27.5 V DC | dim        = 8x8x50 m...")  | 
				|||
| Line 4: | Line 4: | ||
| cp         = Temperature  | | cp         = Temperature  | ||
| temperature= -20 … +60°C  | | temperature= -20 … +60°C  | ||
| − | | voltage    =   | + | | voltage    = 5 V DC  | 
| dim        = 8x8x50 mm  | | dim        = 8x8x50 mm  | ||
}}  | }}  | ||
| Line 37: | Line 37: | ||
| smaxlen         = 30 m*  | | smaxlen         = 30 m*  | ||
| tscablen        = 3m  | | tscablen        = 3m  | ||
| − | | protection      =   | + | | protection      = IP65  | 
| temprange       = -20 … +60 °C  | | temprange       = -20 … +60 °C  | ||
| − | | size            =   | + | | size            = 8x8x50 mm  | 
| weight          = 15g  | | weight          = 15g  | ||
| star1           = +5V and COM should be connected in one twisted pair, and DATA at free one  | | star1           = +5V and COM should be connected in one twisted pair, and DATA at free one  | ||
Revision as of 14:01, 17 August 2021
| FW-FT | |||||||
|---|---|---|---|---|---|---|---|
![]()  | |||||||
  | |||||||
  | |||||||
UNDERFLOOR HEATING TEMPERATURE SENSOR
This is an underfloor heating temperature sensor for DW-HCxx, it can also be used to measure the outdoor temperature.
Pin assignments
Example of connection
Example of connection
Module parameters
| Parameter name | Value | 
|---|---|
| Control parameters | Temperature | 
| Temperature measuring range | -20 … +60°C | 
| Power supply | 5 V DC | 
| Max current | 5 mA | 
| Sensor cable length | 3m | 
| Sensors line max length | 30 m* | 
| Bus type | One Wire | 
| Equipment installation type | Built into the floor/outdoor | 
| Case material | ABS | 
| Protection | IP65 | 
| Temperature range | -20 … +60 °C | 
| Size | 8x8x50 mm | 
| Weight | 15g | 
* - +5V and COM should be connected in one twisted pair, and DATA at free one 
HW settings
| Name | Type, range | SUBID | Default | Description | 
|---|---|---|---|---|
| offset | float (+/- 0…39) | SubID of sensor | 0 | sensor values offset (for temperature sensors) Example:
1hw="offset='-3'"
 | 
