Dimmer-lamp

Example of description in XML

1<item addr="100:10" name="chandelier" type="dimer-lamp" auto-period="600" system="yes">
2    <linked addr="101:1"/>  // is bound to the button with the address 101:1
3    <automation ……/>  // set the automation for this element
4</item>

1<item addr="100:10" name="chandelier" type="dimer-lamp" auto-period="600" color-temp="307:4" color-white="307:5">
2    <linked addr="101:1"/>  // is bound to the button with the address 101:1
3    <automation ……/>  // set the automation for this element
4</item>

color-temp="dimmer ID:SUBID" – for adding and control dimmer brigtness bar with temperature.

color-white="dimmer ID:SUBID" – for adding and control dimmer brigtness bar "white".

Device status (2 bytes)

Byte number	description
0	Device status. Bit 0: 0 – off 1 – on Bit 3: 0 – automation is disactivated 1 – automation is activated Bit 7: 0 – no alarm 1 – alarm (relating to temperature)
1	Brightness 0..250

Possible variants of setting the status

1. single-byte

byte	description
0	Status (on/off) 0 – off 1 – on 0xFF – Change the status for the opposite one

2. 3-bytes

byte	description
0	status (on/off) 0 – off 1 – on 0xFE – do not change the status of this byte 0xFF – Change the status for the opposite one
1	Brightness 0 – off 1..250 – brightness 0xFE – do not change the status of this byte
2	Time required for changing the status, seconds