Blinds

Example of description in XML

1<item addr="100:10" name="blinds" type="blinds" system="yes">
2    <linked addr="101:1"/>  // is bound to the button with the address 101:1
3    <automation ……/>  // set the automation for this element
4</item>

1<item addr="100:10" name="Blinds" type="blinds" vanes="307:5">
2    <linked addr="101:1"/>  // is bound to the button with the address 101:1
3    <automation ……/>  // set the automation for this element
4</item>

vanes="blinds ID:SUBID" – for adding and control vanes

Device status (3 bytes)

Byte number	description
0	Device status. 0 – closed 1 – open 2 – is closing 3 – is opening 4 – middle position 5 – unknown
1	Setpoint level 0..250
2	Current level 0..250

Possible variants of setting the status

single-byte

byte	description
0	0 – stop or 0% 1 – stop or 100% 2 – 0% 3 – 100% 4 – stop 5 – stop or reverse 0%/100% 8 – level +25 (+10%) 9 – level -25 (-10%) 0xFF – Change the status for the opposite one

2-bytes

byte	description
0	7 – direct value 8 – increase setpoint by value 9 – decrease setpoint by value
1	level (0-250)