Difference between revisions of "Translations:Metaforsa 3/3.plus/94/es"

From Larnitech wiki page
Jump to navigation Jump to search
(Created page with "*'e' - botón LED inverso *'d' - botón LED *'c' - botón inverso *'b' - botón *'s' - cambiar *'k' - contacto inverso *'h' - contacto *'l' - fuga *'n' - Neptuno *'v' - movimi...")
Tags: Mobile web edit Mobile edit
(No difference)

Revision as of 14:16, 4 April 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Metaforsa 3/3.plus)
*'e' - led-button inverse
*'d' - led-button
*'c' - button inverse
*'b' - button
*'s' - switch
*'k' - contact inverse
*'h' - contact
*'l' - leak
*'n' - Neptun
*'v' - motion inverse
*'m' - motion
*'r' - thermo-resistor
*'t' - DALLAS
*'-' - none
Example: io='KKKKKKKKKKKKKKKKKKKKKKKKKKKK'
|-
|hw||string||98||-||hw="...", where
*pwm_invert – PWM inverting [1, 0];
*lbn_bright – brightness of led buttons, range (0 - 255);
*f – by default PWM frequency is 1000, range (1 - 5000).
Example:
<syntaxhighlight lang="xml" line>
hw="io='4---zdd----t--' pwm_invert=1 lbn_bright=255 f=1000"
</syntaxhighlight>
|-
|colspan="3"|'''Only for Metaforsa 3.plus'''
|-
|cfg||string||98||9600/8N1||cfg='SPEED/BPS', where
*SPEED – baud rate [1200..115200];
*B – data length [7,8];
*P – presence and type of parity bit [N(No parity),E(Even parity),O(Odd parity)];
*S – stop bit length [1, 1.5 or 2].
Example:
<syntaxhighlight lang="xml" line>
hw="cfg='9600/8N1'"
</syntaxhighlight>
|-
|[Protocol]||string||98||—||Protocol setting is described by protocol parameter. The following
protocols are supported:
*'modbus', Modbus protocol, at the end of redirection the checksum CRC16(Modbus) is added;
*'dmx', DMX protocol;
*'CO2' for connecting Larnitech CO2 sensors;
*'salda' for connecting Salda ventilation.
Example:
<syntaxhighlight lang="xml" line>
hw="cfg='9600/8N1' modbus"
</syntaxhighlight>
|-
|echo||on; off||98||'off'||For settings check out and testing echo parameter can be used. Module
echo-reply can be turned on or off with the help of this parameter.Echo parameter value:
*'off'
*'on'
Example:
<syntaxhighlight lang="xml" line>
hw="cfg='9600/8N1' echo='off'"
</syntaxhighlight>
|}
Translation*'e' - botón LED inverso
*'d' - botón LED
*'c' - botón inverso
*'b' - botón
*'s' - cambiar
*'k' - contacto inverso
*'h' - contacto
*'l' - fuga
*'n' - Neptuno
*'v' - movimiento inverso
*'m' - movimiento
*'r' - termorresistencia
*'t' - DALLAS
  • 'e' - botón LED inverso
  • 'd' - botón LED
  • 'c' - botón inverso
  • 'b' - botón
  • 's' - cambiar
  • 'k' - contacto inverso
  • 'h' - contacto
  • 'l' - fuga
  • 'n' - Neptuno
  • 'v' - movimiento inverso
  • 'm' - movimiento
  • 'r' - termorresistencia
  • 't' - DALLAS
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:Metaforsa_3/3.plus/94/es&oldid=17656"