Difference between revisions of "Translations:Metaforsa 3/3.plus/71/da"

From Larnitech wiki page
Jump to navigation Jump to search
(Created page with "#Slå spænding for modulet fra ved at afbryde strømafbryderen på belastningsstrømforsyningen og METAFORSA-modulforsyningsenheden. Kontroller, at spændingen er fraværende...")
Tags: Mobile web edit Mobile edit
 
(No difference)

Latest revision as of 08:25, 8 April 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Metaforsa 3/3.plus)
#De-energize the module by disconnecting the circuit breaker assembly of the load power supply and METAFORSA module supply unit. Verify the voltage is absent on the terminals (1), (2) of the connector wires and on the input terminals of the supply unit.
#Disconnect the load power supply connectors (1), (2).
#Disconnect the connector (3).
#Disconnect the connectors (4)-(6).
#Remove the module from the DIN-rail, releasing the latch at the bottom of the module base.
Translation#Slå spænding for modulet fra ved at afbryde strømafbryderen på belastningsstrømforsyningen og METAFORSA-modulforsyningsenheden. Kontroller, at spændingen er fraværende på terminalerne (1), (2) på stikledningerne og på forsyningsenhedens indgangsterminaler.
#Afbryd belastningsstrømforsyningens stik (1), (2).
#Afbryd stikket (3).
#Afbryd stikkene (4)-(6).
#Fjern modulet fra DIN-skinnen ved at frigøre låsen i bunden af modulbunden.
  1. Slå spænding for modulet fra ved at afbryde strømafbryderen på belastningsstrømforsyningen og METAFORSA-modulforsyningsenheden. Kontroller, at spændingen er fraværende på terminalerne (1), (2) på stikledningerne og på forsyningsenhedens indgangsterminaler.
  2. Afbryd belastningsstrømforsyningens stik (1), (2).
  3. Afbryd stikket (3).
  4. Afbryd stikkene (4)-(6).
  5. Fjern modulet fra DIN-skinnen ved at frigøre låsen i bunden af modulbunden.