Difference between revisions of "Translations:Metaforsa 3/3.plus/71/cs"

From Larnitech wiki page
Jump to navigation Jump to search
(Created page with "# Odpojte modul od napájení odpojením sestavy jističe napájecího zdroje zátěže a napájecí jednotky modulu METAFORSA. Ověřte, že na svorkách (1), (2) vodičů ko...")
Tags: Mobile web edit Mobile edit
 
(No difference)

Latest revision as of 13:50, 8 April 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Metaforsa 3/3.plus)
#De-energize the module by disconnecting the circuit breaker assembly of the load power supply and METAFORSA module supply unit. Verify the voltage is absent on the terminals (1), (2) of the connector wires and on the input terminals of the supply unit.
#Disconnect the load power supply connectors (1), (2).
#Disconnect the connector (3).
#Disconnect the connectors (4)-(6).
#Remove the module from the DIN-rail, releasing the latch at the bottom of the module base.
Translation# Odpojte modul od napájení odpojením sestavy jističe napájecího zdroje zátěže a napájecí jednotky modulu METAFORSA. Ověřte, že na svorkách (1), (2) vodičů konektoru a na vstupních svorkách napájecí jednotky není napětí.
# Odpojte konektory napájení zátěže (1), (2).
# Odpojte konektor (3).
#Odpojte konektory (4)-(6).
# Vyjměte modul z lišty DIN a uvolněte západku na spodní straně základny modulu.
  1. Odpojte modul od napájení odpojením sestavy jističe napájecího zdroje zátěže a napájecí jednotky modulu METAFORSA. Ověřte, že na svorkách (1), (2) vodičů konektoru a na vstupních svorkách napájecí jednotky není napětí.
  2. Odpojte konektory napájení zátěže (1), (2).
  3. Odpojte konektor (3).
  4. Odpojte konektory (4)-(6).
  5. Vyjměte modul z lišty DIN a uvolněte západku na spodní straně základny modulu.