Revision as of 12:59, 25 December 2021
The basic specifications and characteristics of the module METAFORSA MF-14.A are shown in table 1
Table1
Specification |
Meaning
|
Output ports
|
Number of switched channels |
10
|
Number of switched groups |
10
|
Number of dimming channels |
4
|
Commutation voltage |
0-250 V AC/DC
|
Peak load (one channel) |
16A
|
Peak load (device) |
160A
|
Max load per dimming channel |
0.5A (110W at 220V)
|
Dimmer type |
MOSFET
|
Dimming type |
trailing edge
|
Power supply cable connection type |
connector
|
Permissible section of power supply cable to connect in socket: single-conductor cable multiple-conductor cable tipped multiple-conductor cable |
0.5 … 4mm2 0.5 … 4mm2 0.5 … 2.5mm2
|
Input ports
|
Number of discrete inputs |
24
|
Number of digital inputs |
4
|
Current maximum rating on the direct-current voltage connectors |
50mA
|
Other
|
Operating ambient temperature |
0 … +45°С
|
Storage/transportation temperature |
-20 … +60°С
|
Permissible humidity |
0 … 95% (non-condensing)
|
Power supply |
23 … 27.5 V DC 24V, 0.75A Recommended
|
Maximum demand |
0.5А
|
Available interfaces |
Ethernet, CAN, OneWire
|
Bus type |
CAN (4-wire)
|
CAN (4-wire) |
800 m* (twisted pair 5 cat)
|
CAN wire type |
FTP Cat 5E
|
CAN connection type |
connector
|
Digital line maximum length |
30 m
|
Digital line wirde type |
UTP/FTP Cat 5E
|
LAN maximum length |
100 m
|
LAN wire type |
UTP/FTP Cat 5E
|
LAN connection type |
Connector RJ-45
|
Dimensional specifications |
9U, 156x110x58 mm
|
Shell material |
ABS plastic
|
Casing |
IP40
|
Equipment installation type |
DIN-rail (EN 60715)
|
Weight |
400 g
|
* – installing additional power supply units is required for long lines; the maximum length of the line may be reduced by various interference factors