Difference between revisions of "Translations:Metaforsa2 MF-14/29/en"
From Larnitech wiki page
Jump to navigation
Jump to search
Revision as of 12:59, 25 December 2021
Table2
Connector |
Contact |
Assignment
|
![Out.png](/images/0/0c/Out.png) |
1-10 |
Load application (light lamps, thermal actuators, etc.)
|
![Dimm.png](/images/b/b4/Dimm.png) |
D1-4, L, N |
Load application (dimming lamps)
|
Device status indicators |
The module status indicators are described in table 3
|
![24vconn.png](/images/9/95/24vconn.png) |
+24V GND |
+24V — module power supply by an external 24 V power supply GND — common
|
![Rj45.jpg](/images/a/a9/Rj45.jpg) |
RJ45 |
Connector for LAN connectivity
|
![Inputs.png](/images/5/5a/Inputs.png) |
In1-12, In13-24 GND |
Controlling devices connection (buttons, magnetic reed switches, motion or leakage sensors): +12V — sensor power output +12 V In1 … In24 — logic inputs (0-12 V) GND — common
|
![OW.png](/images/5/5c/OW.png) |
OneWire |
Digital sensors connection (temperature) VCC — sensors power supply output +5V OW1-OW4 — OneWire data buses GND — common
|
![Can.jpg](/images/7/7b/Can.jpg) |
VCC GND L H |
External modules connection for CAN-bus VСС — 12V output for external devices power supply GND — common L — CAN-L data bus H — CAN-H data bus
|