Difference between revisions of "Translations:Metaforsa MF-10/62/en"

From Larnitech wiki page
Jump to navigation Jump to search
(Importing a new version from external source)
Tags: Mobile web edit Mobile edit
 
(No difference)

Latest revision as of 14:57, 2 January 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Metaforsa MF-10)
#LED status indicator/
#LED contact is used to turn on and off the LED display.
#SENS contacts are used to set the sensitivity of the sensor. If the contacts are closed, the high sensitivity is set. If the contacts are open, the low sensitivity is set.
#Terminals:
#*'''+12V''' — sensor power is connected to the contact point of METAFORSA “+12V” 
#*'''COM''' — common, connected to the input of METAFORSA “GND” 
#*'''NC''' — danger relay contact, a jumper is applied at СОМ 
#*'''NC''' — danger relay contact, connected to the input of METAFORSA “in 1-16” 
#*'''TMP''' — not in use 
#*'''TMP''' — not in use
Translation#LED status indicator/
#LED contact is used to turn on and off the LED display.
#SENS contacts are used to set the sensitivity of the sensor. If the contacts are closed, the high sensitivity is set. If the contacts are open, the low sensitivity is set.
#Terminals:
#*'''+12V''' — sensor power is connected to the contact point of METAFORSA “+12V” 
#*'''COM''' — common, connected to the input of METAFORSA “GND” 
#*'''NC''' — danger relay contact, a jumper is applied at СОМ 
#*'''NC''' — danger relay contact, connected to the input of METAFORSA “in 1-16” 
#*'''TMP''' — not in use 
#*'''TMP''' — not in use
  1. LED status indicator/
  2. LED contact is used to turn on and off the LED display.
  3. SENS contacts are used to set the sensitivity of the sensor. If the contacts are closed, the high sensitivity is set. If the contacts are open, the low sensitivity is set.
  4. Terminals:
    • +12V — sensor power is connected to the contact point of METAFORSA “+12V”
    • COM — common, connected to the input of METAFORSA “GND”
    • NC — danger relay contact, a jumper is applied at СОМ
    • NC — danger relay contact, connected to the input of METAFORSA “in 1-16”
    • TMP — not in use
    • TMP — not in use
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:Metaforsa_MF-10/62/en&oldid=3794"