DE-GW/ru

Revision:

A

A/B

/B

/C

DE-GW.C
General Type of connection CAN, Ethernet Input/output interfaces Ethernet, 2xCAN Max CAN devices 100(50 per CAN) CAN port qty 2 Max CAN bus length 800 m (twisted pair 5 cat) Max current per CAN bus 700mA
Other Supply voltage 11.5...27.5 V DC 24V, 2.5A Recommended Dimentions 2U, 35x95x58 mm

ШЛЮЗ

Этот модуль используется для подключения к системе двух дополнительных сетей CAN. Он также преобразует Ethernet в шину CAN и наоборот.

CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.To avoid the risk of fire, electric shock, damage to the system and/or personal injury, the system installation and assembly must be performed in accordance with the instructions listed below:

• all connectivity work must be carried out with the power turned OFF;
• use appropriate tools and personal protection against electric shock;
• do not use damaged cables, wires and connectors;
• avoid folding the cables and wires;
• do not apply excessive force to the wires by kinking or pressing them too hard: the inner conductors of the cables and wires may get stripped or damaged;
• do not use the power socket with poor contacts to connect;
• do not exceed the load limit parameters specified in the manual;
• the supply conductors wire section is subject to the specifications for current density limit, insulation type and wire material. Light section can result in cable overheating and fire.

When the power is on, NEVER:

• connect/disconnect the connectors;
• open modules and sensors.

Module view

1. Indicators
2. Ethernet
3. Power supply
4. CAN1
5. CAN2

Сonnection example

Module dimensions

Connectors

Module parameters

Parameter name	Value
Type of connection	CAN, Ethernet
Input/output interfaces	Ethernet, 2xCAN
Data speed	10/100Mb/s
Max CAN deviсes	100(50 per CAN)
CAN bus topology	BUS
Number of CAN ports	2
Power supply	11.5 … 27.5 V DC 24V, 2.5A Recommended
Max own current (24V)	140mA
Max CAN bus length	800 m* (twisted pair 5 cat)
Max current per CAN bus	700mA
Case material	ABS
Protection	IP40
Equipment installation type	DIN-rail (EN 60715)
Temperature range	-10 … +50°C
Size	2U, 35x95x58 mm
Weight	65 g

* – installing additional power supply units is required for long lines; the maximum length of the line may be reduced by various interference factors

Indication of module operation

Bootloader

Indicator	Status	Description
		Device in bootloader
		Waiting for bootloader command
		Flashing firmware

Firmware

Indicator	Status	Description
		Network configuration
		Identification
		Operational mode
	Operational mode
Error
		Lost connection to server
		Overheat
	Overload
	No AC power
	RTC error
Activity
		CAN activity
		OW activity
	RS-485 activity
	Ethernet activity