Difference between revisions of "Translations:DW-DM06/21/en"

From Larnitech wiki page
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 13:35, 5 January 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (DW-DM06)
==Module shut-off and deinstallation procedure==
#Disconnect the power from the load.
#Disconnect the contacts (1-6).
#Disconnect the CAN connector.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
Translation==Module shut-off and deinstallation procedure==
#Disconnect the power from the load.
#Disconnect the contacts (1-6).
#Disconnect the CAN connector.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.

Module shut-off and deinstallation procedure

  1. Disconnect the power from the load.
  2. Disconnect the contacts (1-6).
  3. Disconnect the CAN connector.
  4. Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:DW-DM06/21/en&oldid=4776"