Difference between revisions of "Translations:DW-DM04/20/en"

From Larnitech wiki page
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 10:58, 6 January 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (DW-DM04)
==Module installation and connection procedure==
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Connect the CAN connector.
#Connect the contacts (1-4).
#Configure the module using LT setup.
#Apply power to the load.
#Check all equipment for proper operation.
Translation==Module installation and connection procedure==
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Connect the CAN connector.
#Connect the contacts (1-4).
#Configure the module using LT setup.
#Apply power to the load.
#Check all equipment for proper operation.

Module installation and connection procedure

  1. Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
  2. Connect the CAN connector.
  3. Connect the contacts (1-4).
  4. Configure the module using LT setup.
  5. Apply power to the load.
  6. Check all equipment for proper operation.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:DW-DM04/20/en&oldid=4942"