Difference between revisions of "Translations:DW-HC10/25/en"
From Larnitech wiki page
Jump to navigation
Jump to search
Revision as of 11:34, 6 January 2022
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (DW-HC10 )
==HW settings==
==HW settings==
{| class="wikitable"
|-
!Name!!Type, range!!SUBID!!Default!!Description
|-
|-
|def||string||1-10||'OFF'||Def is the element status is set after restart, is used for lamp, heating, valve(1 pole);
Set 'last' saved state of the element in case of a power reset. The element save his state after stay unchanged for 10 minutes.
Example:
def='ON'
def='last'
|-
|offset||integer -39 – 39||31-42||0||It is the sensor values offset; Example: offset='-1.2'
|-
|mode||string||98||'AС'||Output operatoin mode:
*'AС' – 220V AC
*'DC' – DC current
|-
|out||char[10]||98||'HHHHHHHHHH'||Each char is responsible for the type of a particular channel
*'D'- PWM output (frequency 0.4Hz);
*'С'- Fancoil dimmer;
*'L'-Lamp;
*'M'-Lamp Inverse;
*'J'-Heating NO, valve-heating, normally open;
*'H'-Heating NC, valve-heating, normally closed;
*'V'-Valve (2 pole), 2 pole valve;
*'W'-Valve (2 pole) Inverse, 2 pole valve, invert open-close;
*'R'-Valve (1 pole), 1 pole valve,;
*'S'-Valve (1 pole) Inverse, 1 pole valve, invert open-close;
*'K'-Lock (short press);
*'N'-Lock (short press) Inverse;
*'F'-FanCoil. Group1 (Lamp Toggle). For fancoil speed control;
*'E'-FanCoil. Group2 (Lamp Toggle). For fancoil speed control;
*'Q'-FanCoil. Group3 (Lamp Toggle). For fancoil speed control;
*'U'-FanCoil. Group4 (Lamp Toggle). For fancoil speed control;
*'I'-FanCoil. Group5 (Lamp Toggle). For fancoil speed control;
*'-'-none, nothing is connected.
Example: out='BGLKMVX'
|-
|in||char[12]||98||'++++++++++++'||Each char is responsible for the type of a particular channel
*'D'-DS18B20 digital sensor;
*'R'-Analogue temperature sensor;
*'+'-Autodetection;
*'-'Not used;
Example: out='+DR+R–R+RD+'
|-
|r||int||31-42||'10000'||Analogue temperature sensor`s resistance on 25 °C.
Example: r='8000'
|} Translation ==HW settings== HW settings
Name
Type, range
SUBID
Default
Description
def
string
1-10
'OFF'
Def is the element status is set after restart, is used for lamp, heating, valve(1 pole);
Set 'last' saved state of the element in case of a power reset. The element save his state after stay unchanged for 10 minutes.
Example:
def='ON'
def='last'
offset
integer -39 – 39
31-42
0
It is the sensor values offset; Example: offset='-1.2'
mode
string
98
'AС'
Output operatoin mode:
'AС' – 220V AC
'DC' – DC current
out
char[10]
98
'HHHHHHHHHH'
Each char is responsible for the type of a particular channel
'D'- PWM output (frequency 0.4Hz);
'L'-Lamp;
'M'-Lamp Inverse;
'J'-Heating NO, valve-heating, normally open;
'H'-Heating NC, valve-heating, normally closed;
'V'-Valve (2 pole), 2 pole valve;
'W'-Valve (2 pole) Inverse, 2 pole valve, invert open-close;
'R'-Valve (1 pole), 1 pole valve,;
'S'-Valve (1 pole) Inverse, 1 pole valve, invert open-close;
'K'-Lock (short press);
'N'-Lock (short press) Inverse;
'F'-FanCoil. Group1 (Lamp Toggle). For fancoil speed control;
'E'-FanCoil. Group2 (Lamp Toggle). For fancoil speed control;
'Q'-FanCoil. Group3 (Lamp Toggle). For fancoil speed control;
'U'-FanCoil. Group4 (Lamp Toggle). For fancoil speed control;
'I'-FanCoil. Group5 (Lamp Toggle). For fancoil speed control;
'-'-none, nothing is connected. Example: out='BGLKMVX'
in
char[12]
98
'++++++++++++'
Each char is responsible for the type of a particular channel
'D'-DS18B20 digital sensor;
'R'-Analogue temperature sensor;
'+'-Autodetection;
'-'Not used; Example: out='+DR+R–R+RD+'
r
int
31-42
'10000'
Analogue temperature sensor`s resistance on 25 °C.
Example: r='8000'