Difference between revisions of "Translations:DW-DALI2.C/DW-DALI.C/20/en"

From Larnitech wiki page
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 11:58, 8 January 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (DW-DALI2.C/DW-DALI.C)
===Module installation and connection procedure===
<div class="caution">
CAUTION! You must precisely follow the recommendations listed in the «Safety Requirements» section of this manual.
</div>
#Install the module in the switchboard on the DIN-rail and secure it with special latches available on the module base.
#Connect the CAN-bus (4).
#Connect the DALI-bus (1).
#Connect the DALI power connector (2).
#Energise the module power supply (24 V).
Translation===Module installation and connection procedure===
<div class="caution">
CAUTION! You must precisely follow the recommendations listed in the «Safety Requirements» section of this manual.
</div>
#Install the module in the switchboard on the DIN-rail and secure it with special latches available on the module base.
#Connect the CAN-bus (4).
#Connect the DALI-bus (1).
#Connect the DALI power connector (2).
#Energise the module power supply (24 V).

Module installation and connection procedure

CAUTION! You must precisely follow the recommendations listed in the «Safety Requirements» section of this manual.

  1. Install the module in the switchboard on the DIN-rail and secure it with special latches available on the module base.
  2. Connect the CAN-bus (4).
  3. Connect the DALI-bus (1).
  4. Connect the DALI power connector (2).
  5. Energise the module power supply (24 V).