Difference between revisions of "CW-HTMLI/ru"
From Larnitech wiki page
Jump to navigation
Jump to search
Revision as of 12:02, 10 January 2022
CW-HTMLI |
---|
|
|
Control parameters | Humidity, lighting, movement |
---|
Angle of vision IR | 360° |
---|
|
|
Supply voltage | 11.5...27.5 V DC |
---|
Dimentions | 80x70x25 mm |
---|
|
4 IN 1 SENSOR
This module contains motion, lighting, humidity sensors and an IR transmitter.
Module view
Motion detection area
Module parameters
Parameter name |
Value
|
Input channels qty |
|
Input/output channels qty |
|
0-10 input port quantity |
|
Buttons |
|
LED Buttons |
|
Number of sensor inputs |
|
Number of dry contact inputs |
|
RS485 ports qty |
|
RS232 ports qty |
|
UART ports qty |
|
M-BUS port quantity |
|
Pulse inputs quantity |
|
DALI ports qty |
|
DALI-line voltage supply |
|
Peak current of DALI-line power supply |
|
Peak current in DALI-line |
|
Maximum DALI devices quantity |
|
Dimming channels qty |
|
Output channels qty |
|
0-10 output port quantity |
|
Analog output channels qty |
|
Output |
|
Digital line maximum length |
|
Discrete input channels qty |
|
Digital input channels qty |
|
Speakers |
|
Max power output audio channel |
|
Camera |
|
IR lighting |
|
Card reader |
|
Connection type |
|
Protocols |
|
Backlight voltage |
|
Load type |
|
Dimmer load type |
|
Supported sensors |
|
Input voltage |
|
Current type |
|
Adjustment type |
|
Max load |
|
Min load |
|
Max load per channel |
|
Max load per group |
|
Max load per device |
|
Control parameters |
Humidity, lighting, movement
|
Angle of vision IR |
360°
|
Angle of motion |
°
|
Temperature measuring range |
°C
|
Humidity measuring range |
|
Dimmer type |
|
Dimming type |
|
Voltage that may be applied to the input channels |
|
Max output switching voltage |
|
Max output switching current |
|
Power supply |
11.5 … 27.5 V DC from CAN
|
Max current(24V) |
100 mA
|
Max current(13V) |
|
Max detection distance |
|
Max IR distance |
|
Max BT distance |
|
Max current |
|
Relay |
|
Data transfer speed |
|
Permissible section of power supply cable to connect in socket: |
|
Sensors VCC output |
|
Sensors max VCC current |
|
R1-R2 inputs max current |
|
Push-button/reed switches line recommended length |
|
Temperature sensor line max length |
|
Sensor cable length |
|
Sensors line max length |
|
Bus type |
CAN (4-wire)
|
Compatible with |
|
Output voltage |
|
Output current |
|
Equipment installation type |
Wall, celling
|
Mounting |
|
Max cabel lenght |
|
Case material |
ABS
|
Protection |
IP40
|
Temperature range |
-10 … +50 °C
|
Size |
80x70x25 mm
|
Weight |
30g
|
* -
** -
*** -
1 -
2 -
3 -
HW settings
Name |
Type, range |
SUBID |
Default |
Description
|
offset |
float(+/- 0…39) |
SubID of sensor |
0 |
sensor values offset (for temperature sensors) Example:
|
scale |
float (0…8) |
SubID of sensor |
1 |
multiplier determines the slope of values (except temperature sensors) Example:
|
pwr |
integer (1…100) |
SubID of IR-transmitter |
50 |
Power of infrared transmitter signal. Example:
|
1<item addr="381:11" cfgid="63" name="IR transmitter" type="ir-transmitter" uniq_id="102"/>
2<item addr="381:30" cfgid="63" name="Motion" type="motion-sensor" uniq_id="103" hw="scale='3'"/>
3<item addr="381:31" cfgid="63" name="Illumination" type="illumination-sensor" uniq_id="104" hw="scale='0.4'"/>
4<item addr="381:32" cfgid="63" name="Temperature" type="temperature-sensor" uniq_id="105" hw="offset='10'"/>
5<item addr="381:33" cfgid="63" name="Humidity" type="humidity-sensor" uniq_id="106" hw="scale='5'"/>
6<item addr="381:98" cfgid="63" name="Temperature" system="yes" type="temperature-sensor" uniq_id="107"/>