(Created page with "{{ Mp | ctrlparams = lighting, motion | irangle = 360° | power = 11.5 … 27.5 V DC from CAN | maxcur24v = 50 mA | maxird = 3 meters* |...")
(No difference)
Latest revision as of 12:23, 10 January 2022
Parameter name
Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs
Number of dry contact inputs
RS485 ports qty
RS232 ports qty
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty
Output channels qty
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type
Supported sensors
Input voltage
Current type
Adjustment type
Max load
Min load
Max load per channel
Max load per group
Max load per device
Control parameters
lighting, motion
Angle of vision IR
360°
Angle of motion
°
Temperature measuring range
°C
Humidity measuring range
Dimmer type
Dimming type
Voltage that may be applied to the input channels
Max output switching voltage
Max output switching current
Power supply
11.5 … 27.5 V DC from CAN
Max current(24V)
50 mA
Max current(13V)
Max detection distance
Max IR distance
3 meters*
Max BT distance
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output
Sensors max VCC current
R1-R2 inputs max current
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length
Bus type
CAN (4-wire)
Compatible with
Output voltage
Output current
Equipment installation type
Wall, celling
Mounting
Max cabel lenght
Case material
ABS
Protection
IP40
Temperature range
-10 … +50 °C
Size
17x17x60 mm
Weight
30g
* - depends on many factors, such as the sensitivity of the IR receiver, the reflectivity of surfaces etc. Recommended distance up to 3 meters