Difference between revisions of "FW-FT/ru"
Jump to navigation
Jump to search
(Created page with "FW-FT") |
(Created page with "==ВСТРОЕННЫЙ В ПОЛ ДАТЧИК ТЕМПЕРАТУРЫ НАГРЕВА==") |
||
| Line 9: | Line 9: | ||
}} | }} | ||
| − | == | + | ==ВСТРОЕННЫЙ В ПОЛ ДАТЧИК ТЕМПЕРАТУРЫ НАГРЕВА== |
This is an underfloor heating temperature sensor for DW-HCxx, it can also be used to measure the outdoor temperature. | This is an underfloor heating temperature sensor for DW-HCxx, it can also be used to measure the outdoor temperature. | ||
Revision as of 13:07, 10 January 2022
| FW-FT | |||||||
|---|---|---|---|---|---|---|---|
![]() | |||||||
| |||||||
| |||||||
ВСТРОЕННЫЙ В ПОЛ ДАТЧИК ТЕМПЕРАТУРЫ НАГРЕВА
This is an underfloor heating temperature sensor for DW-HCxx, it can also be used to measure the outdoor temperature.
Pin assignments
Example of connection
Example of connection
Module parameters
| Parameter name | Value |
|---|---|
| Control parameters | Temperature |
| Temperature measuring range | -20 … +60°C |
| Power supply | 5 V DC |
| Max current | 5 mA |
| Sensor cable length | 3m |
| Sensors line max length | 30 m* |
| Bus type | One Wire |
| Equipment installation type | Built into the floor/outdoor |
| Case material | ABS |
| Protection | IP65 |
| Temperature range | -20 … +60 °C |
| Size | 8x8x50 mm |
| Weight | 15g |
* - +5V and COM should be connected in one twisted pair, and DATA at free one
HW settings
| Name | Type, range | SUBID | Default | Description |
|---|---|---|---|---|
| offset | float (+/- 0…39) | SubID of sensor | 0 | sensor values offset (for temperature sensors) Example:
1hw="offset='-3'"
|
