Difference between revisions of "Translations:Router setup/3/en"

From Larnitech wiki page
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 12:23, 13 January 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Router setup)
*Network settings of the DE-MG/Metaforsa module match your router settings (default IP address 192.168.1.111/255.255.255.0);
*IP address of the DE-MG/Metaforsa module is beyond the range of IP addresses, which the DHCP server of your router provides.
If the network settings of the DE-MG/Metaforsa module do not match the settings of your router, it is necessary to take one of the following actions:
*Change the network settings of the router according to the settings of DE-MG/Metaforsa module;
*Change the network settings of DE-MG/Metaforsa module using a PC (Ethernet port is required);
*Change the network settings of DE-MG/Metaforsa module with the help of the router.
Translation*Network settings of the DE-MG/Metaforsa module match your router settings (default IP address 192.168.1.111/255.255.255.0);
*IP address of the DE-MG/Metaforsa module is beyond the range of IP addresses, which the DHCP server of your router provides.
If the network settings of the DE-MG/Metaforsa module do not match the settings of your router, it is necessary to take one of the following actions:
*Change the network settings of the router according to the settings of DE-MG/Metaforsa module;
*Change the network settings of DE-MG/Metaforsa module using a PC (Ethernet port is required);
*Change the network settings of DE-MG/Metaforsa module with the help of the router.
  • Network settings of the DE-MG/Metaforsa module match your router settings (default IP address 192.168.1.111/255.255.255.0);
  • IP address of the DE-MG/Metaforsa module is beyond the range of IP addresses, which the DHCP server of your router provides.

If the network settings of the DE-MG/Metaforsa module do not match the settings of your router, it is necessary to take one of the following actions:

  • Change the network settings of the router according to the settings of DE-MG/Metaforsa module;
  • Change the network settings of DE-MG/Metaforsa module using a PC (Ethernet port is required);
  • Change the network settings of DE-MG/Metaforsa module with the help of the router.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:Router_setup/3/en&oldid=7378"