Difference between revisions of "Translations:Scripts database/7/en"
From Larnitech wiki page
Jump to navigation
Jump to search
Latest revision as of 15:09, 19 January 2022
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Scripts database )
==Other==
==Other==
{|class="wikitable" | style="width:1000px;"
|-
!style="width:200px;"|Script name!!Description!!style="width:100px;"|Available DE-MG!!style="width:100px;"|Available Metaforsa
|-
|Cyclic Selection||Select some devices and turn them on one after the other by using one button. Pressing the button turns off the current device and turns on the next one. If the device is the last one on the list, then the next press turns it off (and all the devices are turned off).||+||-*
|-
|Script of hysteresis||Set up the hysteresis for any device on any sensor. For example, set the upper and lower limit for the temperature sensor and select the AC unit. If the sensor reading exceeds the upper limit, the AC unit will turn on and will work until the sensor reading is less than the lower limit||+||+
|-
|Script of gysteresis with middle level||Select the sensor, upper and lower limit, and also the middle level; select two devices. If the sensor reading upper limit is exceeded, the first device will be turned on; it will be working until the sensor reading reaches the middle level. Similarly, if the sensor reading falls below the lower limit, the second device will be turned on; it will be working until the sensor reading reaches the middle level||+||+
|-
|Transmitting IR commands one by one by activating script||You can select some commands(5 max), time-interval between them and send them with one click. For example, you can immediately turn on the TV and receiver by pressing the icon of the script, then after a time (delay), when the TV is loaded, switch it to the HDMI output||+||+
|-
|Morning alarm||By activating the script, the selected melody played at the media point with the selected time interval increasing. Curtains open with the chosen delay||+||+
|-
|Initialization when the module starts||Set the selected status for each selected device when initializing||+||+
|-
|Restoring device status||If you have previously saved the state of the device, then using this script, you can restore it.||+||+
|-
|Saving device state||For example, you need to save the current color and brightness of RGB. You can save them in non-volatile memory and then use these settings at any time.||+||-*
|-
|Actions that depend on sensor readings||Control different devices according to the sensor reading with 1 script||+||-*
|-
|Smart blinds||In the interface a blinds management icon will be created. Specify the type of blinds control, control contacts and manage it using the icon||+||-*
|-
|Time-dependent act(control by script)||Control different device according to the time. For example activating this script you can turn on morning light in the morning, evening lighting in the evening and any lighting in any time of day.||+||-*
|-
|Device notification||Sending notification in case of device work to long||+||-*</tD>
|} Translation ==Other== Other
Script name
Description
Available DE-MG
Available Metaforsa
Cyclic Selection
Select some devices and turn them on one after the other by using one button. Pressing the button turns off the current device and turns on the next one. If the device is the last one on the list, then the next press turns it off (and all the devices are turned off).
+
-*
Script of hysteresis
Set up the hysteresis for any device on any sensor. For example, set the upper and lower limit for the temperature sensor and select the AC unit. If the sensor reading exceeds the upper limit, the AC unit will turn on and will work until the sensor reading is less than the lower limit
+
+
Script of gysteresis with middle level
Select the sensor, upper and lower limit, and also the middle level; select two devices. If the sensor reading upper limit is exceeded, the first device will be turned on; it will be working until the sensor reading reaches the middle level. Similarly, if the sensor reading falls below the lower limit, the second device will be turned on; it will be working until the sensor reading reaches the middle level
+
+
Transmitting IR commands one by one by activating script
You can select some commands(5 max), time-interval between them and send them with one click. For example, you can immediately turn on the TV and receiver by pressing the icon of the script, then after a time (delay), when the TV is loaded, switch it to the HDMI output
+
+
Morning alarm
By activating the script, the selected melody played at the media point with the selected time interval increasing. Curtains open with the chosen delay
+
+
Initialization when the module starts
Set the selected status for each selected device when initializing
+
+
Restoring device status
If you have previously saved the state of the device, then using this script, you can restore it.
+
+
Saving device state
For example, you need to save the current color and brightness of RGB. You can save them in non-volatile memory and then use these settings at any time.
+
-*
Actions that depend on sensor readings
Control different devices according to the sensor reading with 1 script
+
-*
Smart blinds
In the interface a blinds management icon will be created. Specify the type of blinds control, control contacts and manage it using the icon
+
-*
Time-dependent act(control by script)
Control different device according to the time. For example activating this script you can turn on morning light in the morning, evening lighting in the evening and any lighting in any time of day.
+
-*
Device notification
Sending notification in case of device work to long
+
-*