3,388
edits
Changes
Jump to navigation
Jump to search
Updating to match new version of source page
<languages/>
===Example of description in XML===
<syntaxhighlight lang="xml" line>
<item addr="2048:10" name="TV" type="remote-control" sub-type="Samsung">
<remote-signal identifier="signal-power" transmitter-addr="210:12" value="196406...7F09FC"/>
<remote-signal identifier="signal-1" transmitter-addr="210:12" value="196406...7F09FC"/>
…..
<remote-signal identifier="signal-ch-down" transmitter-addr="210:12" value="196406...7F09FC"/>
</item>
</syntaxhighlight>
===Parameters===
{|class="wikitable"
|-
|-
!Name!!type and variety!!description!!default value
|-
|id||number 2048||ID of the device where this element is located physically (always use 2048)||2048
|-
|sub-type||enum||displayed remote control module (it should be specified in the interface)||-
|-
|identifier||enum||remote control button identifier||-
|-
|transmitter-addr||ADDR||IR signals transmitter address or address of another executor (script, interface etc.)||-
|-
|value||HEX||Data sent by IR transmitter when activating the button||-
|-
|string-value||String||Data sent to ADDR when activating the button||-
|}
===In order to add the device IR-console to "Larnitech" application it is required===
#Add to logic.xml file the device of remote-control type using LT Setup (Add remote control) or choose "Edit mode" in mobile app and press "Create remote" button from main menu.
#Activate the engineering mode in " Larnitech " app settings.
#In the device list find the remote control added from LT Setup and choose "Edit mode".
#In the window that appears select the IR-transmitter from which the IR-signals will be sent to the device (TV, DVD, Receiver).
#In the window that appears select the IR-receiver (gateway) for reading the IR-signals from the device remote control (TV, DVD, Receiver).
#Press the remote control button in "Larnitech" application, the countdown will start during which you are to send the IR-signal to the IR-receiver (gateway). The gateway will capture the signal and the button in "Larnitech" application will be activated.
#Set each the button of the device remote control as it is shown in paragraph No.6.
===Example of description in XML===
<syntaxhighlight lang="xml" line>
<item addr="2048:10" name="TV" type="remote-control" sub-type="Samsung">
<remote-signal identifier="signal-power" transmitter-addr="210:12" value="196406...7F09FC"/>
<remote-signal identifier="signal-1" transmitter-addr="210:12" value="196406...7F09FC"/>
…..
<remote-signal identifier="signal-ch-down" transmitter-addr="210:12" value="196406...7F09FC"/>
</item>
</syntaxhighlight>
===Parameters===
{|class="wikitable"
|-
|-
!Name!!type and variety!!description!!default value
|-
|id||number 2048||ID of the device where this element is located physically (always use 2048)||2048
|-
|sub-type||enum||displayed remote control module (it should be specified in the interface)||-
|-
|identifier||enum||remote control button identifier||-
|-
|transmitter-addr||ADDR||IR signals transmitter address or address of another executor (script, interface etc.)||-
|-
|value||HEX||Data sent by IR transmitter when activating the button||-
|-
|string-value||String||Data sent to ADDR when activating the button||-
|}
===In order to add the device IR-console to "Larnitech" application it is required===
#Add to logic.xml file the device of remote-control type using LT Setup (Add remote control) or choose "Edit mode" in mobile app and press "Create remote" button from main menu.
#Activate the engineering mode in " Larnitech " app settings.
#In the device list find the remote control added from LT Setup and choose "Edit mode".
#In the window that appears select the IR-transmitter from which the IR-signals will be sent to the device (TV, DVD, Receiver).
#In the window that appears select the IR-receiver (gateway) for reading the IR-signals from the device remote control (TV, DVD, Receiver).
#Press the remote control button in "Larnitech" application, the countdown will start during which you are to send the IR-signal to the IR-receiver (gateway). The gateway will capture the signal and the button in "Larnitech" application will be activated.
#Set each the button of the device remote control as it is shown in paragraph No.6.