Difference between revisions of "BT-CAN"

From Larnitech wiki page
Jump to navigation Jump to search
m (Update maxcur24v)
 
(13 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
{{Infobox module
 
{{Infobox module
 
| name      = BT-CAN
 
| name      = BT-CAN
−
| image      = BT-CAN.png
+
| image      = BT-CAN-update.png
 
| voltage    = 11.5...27.5 V DC
 
| voltage    = 11.5...27.5 V DC
 
| dim        = 45x42x14 mm
 
| dim        = 45x42x14 mm
Line 19: Line 19:
 
[[File:BTCAN_VIEW.png|300px]]
 
[[File:BTCAN_VIEW.png|300px]]
  
−
==Mash connection== <!--T:4-->
+
==Broadcast connection== <!--T:4-->
−
[[File:BTCAN_connection_Mash.png|300px]]
+
[[File:BTCAN_connection_Mash.png|500px]]
  
 
==Point-to-point connection== <!--T:4-->
 
==Point-to-point connection== <!--T:4-->
−
[[File:BTCAN_connection_P2P.png|300px]]
+
[[File:BTCAN_connection_P2P.png|500px]]
  
 
==Module parameters== <!--T:7-->
 
==Module parameters== <!--T:7-->
Line 29: Line 29:
 
<!--T:8-->
 
<!--T:8-->
 
{{ Mp
 
{{ Mp
−
| power          = 11.5 … 27.5 V DC from CAN
+
| power          = 11.5 … 27.5 V DC from CAN or PS
−
| maxcur24v      = ??? mA
+
| maxcur24v      = 30 mA
 +
| maxbtd          = 220 m
 
| bustype        = CAN (4-wire)
 
| bustype        = CAN (4-wire)
 
| instalation    = Free
 
| instalation    = Free
Line 39: Line 40:
 
| weight          = 25 g
 
| weight          = 25 g
 
}}
 
}}
−
 
−
==Module installation and connection procedure== <!--T:9-->
 
  
 
==HW settings== <!--T:13-->
 
==HW settings== <!--T:13-->
Line 47: Line 46:
 
!Name!!Type, range!!SUBID!!Default!!Description
 
!Name!!Type, range!!SUBID!!Default!!Description
 
|-
 
|-
−
|in||char[16]||98||'BBBBBB'||Each char is responsible for the type of a particular channel
+
|slave||char[10]||98||-||Sn of slave BT-CAN module in hex format for P2P connection. Setting for master BT-CAN/DE-MG.Plus module only
−
*'B'-Button, button of bell a type;
+
Example:
−
*'C'-Inverted button, inverse button of a bell type (for normally-closed);
+
<syntaxhighlight lang="xml" line>hw="slave=0xe8245161"</syntaxhighlight>
−
*'D'-Backlit button, illuminated button;
+
|-
−
*'E'-Inverted backlit button, inverse illuminated button;
+
|pin||integer 1-999999||98||-||Pin for P2P connection, must be same for master and slave
−
*'S'-Switch, fixed switch;
+
Example:
−
*'K'-Contact, reed contact;
+
<syntaxhighlight lang="xml" line>hw="pin=1111"</syntaxhighlight>
−
*'H'-Inverted contact, inverse reed contact;
 
−
*'G'-GND, is used as earthing;
 
−
*'-'-none, nothing is connected.
 
−
And you can also connect one temperature sensor:
 
−
<syntaxhighlight lang="xml" line>hw="in='T-----'"</syntaxhighlight>
 
−
<syntaxhighlight lang="xml" line>Example: in='DEHSSG'</syntaxhighlight>
 
 
|-
 
|-
−
|offset||float(+/- 0…39)||SubID 30 temperature sensor||'0'||sensor values offset;
+
|mi-temp1||char[12]||98||-||Sn of Xiaomi temperature/humidity sensor for broadcast connection.
−
For example, offset is -3.8 :
+
Example:
−
<syntaxhighlight lang="xml" line>hw="offset='-3.8'"</syntaxhighlight>
+
<syntaxhighlight lang="xml" line>hw="mi-temp1='A4C218FEBA4C'"</syntaxhighlight>
 
|}
 
|}
  
Line 71: Line 64:
 
<!--T:15-->
 
<!--T:15-->
 
<syntaxhighlight lang="xml" line>
 
<syntaxhighlight lang="xml" line>
−
<item addr="477:13" cfgid="180" name="Switch" type="switch" uniq_id="78"/>
+
<item addr="866:98" cfgid="150" hw="slave=0xe8145261 pin=1111" logic-ver="19" name="Temperature" sn="306598234" system="yes" type="temperature-sensor"/>
−
<item addr="477:14" cfgid="180" name="Switch" type="switch" uniq_id="79"/>
+
<item addr="810:98" cfgid="150" hw="mi-temp1='A4C328FEBA3C'" logic-ver="19" name="Temperature" sn="881628906" system="yes" type="temperature-sensor"/>
−
<item addr="477:16" cfgid="180" name="Door" type="door-sensor" uniq_id="80"/>
 
−
<item addr="477:30" cfgid="180" hw="offset='15'" name="Temperature" type="temperature-sensor" uniq_id="83"/>
 
−
<item addr="477:98" cfgid="180" hw="in='T+DD-H'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="76"/>
 
 
</syntaxhighlight>
 
</syntaxhighlight>
 
</translate>
 
</translate>

Latest revision as of 09:07, 18 January 2024


BT-CAN
BT-CAN-update.png
Other
Supply voltage11.5...27.5 V DC
Dimentions45x42x14 mm


CAN to Bluetooth adapter

This module is used to connect to remote devices via Bluetooth.

Overview

BTCAN VIEW.png

Broadcast connection

BTCAN connection Mash.png

Point-to-point connection

BTCAN connection P2P.png

Module parameters

Parameter name Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs
Number of dry contact inputs
RS485 ports qty
RS232 ports qty
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty
Output channels qty
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type
Supported sensors
Input voltage
Current type
Adjustment type
Max load
Min load
Max load per channel
Max load per group
Max load per device
Control parameters
Angle of vision IR °
Angle of motion °
Temperature measuring range °C
Humidity measuring range
Dimmer type
Dimming type
Voltage that may be applied to the input channels
Max output switching voltage
Max output switching current
Power supply 11.5 … 27.5 V DC from CAN or PS
Max current(24V) 30 mA
Max current(13V)
Max detection distance
Max IR distance
Max BT distance 220 m
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output
Sensors max VCC current
R1-R2 inputs max current
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length
Bus type CAN (4-wire)
Compatible with
Output voltage
Output current
Equipment installation type Free
Mounting
Max cabel lenght
Case material ABS
Protection IP40
Temperature range -10 … +50 °C
Size 45x42x14 mm
Weight 25 g
* -
** -
*** -
1 -
2 -
3 -


HW settings

Name Type, range SUBID Default Description
slave char[10] 98 - Sn of slave BT-CAN module in hex format for P2P connection. Setting for master BT-CAN/DE-MG.Plus module only

Example: 

1hw="slave=0xe8245161"
pin integer 1-999999 98 - Pin for P2P connection, must be same for master and slave

Example: 

1hw="pin=1111"
mi-temp1 char[12] 98 - Sn of Xiaomi temperature/humidity sensor for broadcast connection.

Example: 

1hw="mi-temp1='A4C218FEBA4C'"

Input HW configuration

1<item addr="866:98" cfgid="150" hw="slave=0xe8145261 pin=1111" logic-ver="19" name="Temperature" sn="306598234" system="yes" type="temperature-sensor"/>
2<item addr="810:98" cfgid="150" hw="mi-temp1='A4C328FEBA3C'" logic-ver="19" name="Temperature" sn="881628906" system="yes" type="temperature-sensor"/>
Retrieved from "https://wiki.larnitech.com/index.php?title=BT-CAN&oldid=13414"