Difference between revisions of "FW-WL.A"
From Larnitech wiki page
Jump to navigation
Jump to search
|
|
| (One intermediate revision by the same user not shown) |
| Line 26: |
Line 26: |
| | | power = 9-12 V DC | | | power = 9-12 V DC |
| | | maxcur24v = 20 mA | | | maxcur24v = 20 mA |
| − | | compatible = MF-10<br><br>DW-WL02/HTxx<br>BW-LSA | + | | compatible = Metaforsa devices<br>DW-WL02/HTxx<br>BW-LSA |
| | | instalation = Free | | | instalation = Free |
| | | case = ABS | | | case = ABS |
| Line 32: |
Line 32: |
| | | temprange = -10 … +50 °C | | | temprange = -10 … +50 °C |
| | | size = 57x47x22 mm | | | size = 57x47x22 mm |
| − | | weight = 20g | + | | weight = 35g |
| | }} | | }} |
Latest revision as of 16:02, 21 December 2021
| FW-WL.B |
|---|
 |
|
| Supply voltage | 9-12 V DC |
|---|
| Dimentions | 57x47x22 mm |
|---|
|
ON-THE-FLOOR LEAKAGE SENSOR
The sensor is placed on the floor surface. It has an alarm light, which
changes from green to red if the sensor detects water on the floor.
Used together with DW-WL02 or BW-LSA modules.
Example of connection
Connectors
Module parameters
| Parameter name |
Value
|
| Input channels qty |
|
| Input/output channels qty |
|
| 0-10 input port quantity |
|
| Buttons |
|
| LED Buttons |
|
| Number of sensor inputs |
|
| Number of dry contact inputs |
|
| RS485 ports qty |
|
| RS232 ports qty |
|
| UART ports qty |
|
| M-BUS port quantity |
|
| Pulse inputs quantity |
|
| DALI ports qty |
|
| DALI-line voltage supply |
|
| Peak current of DALI-line power supply |
|
| Peak current in DALI-line |
|
| Maximum DALI devices quantity |
|
| Dimming channels qty |
|
| Output channels qty |
|
| 0-10 output port quantity |
|
| Analog output channels qty |
|
| Output |
|
| Digital line maximum length |
|
| Discrete input channels qty |
|
| Digital input channels qty |
|
| Speakers |
|
| Max power output audio channel |
|
| Camera |
|
| IR lighting |
|
| Card reader |
|
| Connection type |
|
| Protocols |
|
| Backlight voltage |
|
| Load type |
|
| Dimmer load type |
|
| Supported sensors |
|
| Input voltage |
|
| Current type |
|
| Adjustment type |
|
| Max load |
|
| Min load |
|
| Max load per channel |
|
| Max load per group |
|
| Max load per device |
|
| Control parameters |
|
| Angle of vision IR |
°
|
| Angle of motion |
°
|
| Temperature measuring range |
°C
|
| Humidity measuring range |
|
| Dimmer type |
|
| Dimming type |
|
| Voltage that may be applied to the input channels |
|
| Max output switching voltage |
|
| Max output switching current |
|
| Power supply |
9-12 V DC
|
| Max current(24V) |
20 mA
|
| Max current(13V) |
|
| Max detection distance |
|
| Max IR distance |
|
| Max BT distance |
|
| Max current |
|
| Relay |
|
| Data transfer speed |
|
| Permissible section of power supply cable to connect in socket: |
|
| Sensors VCC output |
|
| Sensors max VCC current |
|
| R1-R2 inputs max current |
|
| Push-button/reed switches line recommended length |
|
| Temperature sensor line max length |
|
| Sensor cable length |
|
| Sensors line max length |
|
| Bus type |
|
| Compatible with |
Metaforsa devices
DW-WL02/HTxx
BW-LSA
|
| Output voltage |
|
| Output current |
|
| Equipment installation type |
Free
|
| Mounting |
|
| Max cabel lenght |
|
| Case material |
ABS
|
| Protection |
IP64
|
| Temperature range |
-10 … +50 °C
|
| Size |
57x47x22 mm
|
| Weight |
35g
|
* -
** -
*** -
1 -
2 -
3 -