Larnitech wiki page

Difference between revisions of "CW-HTMLI-II CW-CO2.C1"

(Created page with "<languages/> <translate> <!--T:1--> {{revisionChanger |hasC=1 |hasC1=1}} <!--T:2--> {{Infobox module | name = CW-HTMLI-II / CW-CO2.C1 | image = CW-HTMLI-II.png | c...")
 
 
(One intermediate revision by the same user not shown)
Line 7: Line 7:
 
{{Infobox module
 
{{Infobox module
 
| name      = CW-HTMLI-II / CW-CO2.C1
 
| name      = CW-HTMLI-II / CW-CO2.C1
−
| image      = CW-HTMLI-II.png
+
| image      = CW-CO2 png.png
−
| cp        = Humidity, lighting, movement,<br>temperature, CO2 (CW-CO2 only)
+
| cp        = Humidity, lighting, movement,<br>temperature, air quality sensor
 
| ir        = 360°
 
| ir        = 360°
 
| voltage    = 11.5...27.5 V DC
 
| voltage    = 11.5...27.5 V DC
Line 18: Line 18:
 
<!--T:4-->
 
<!--T:4-->
 
This module contains motion, lighting, humidity, temperature,
 
This module contains motion, lighting, humidity, temperature,
−
CO2 sensors and an IR transmitter.
+
air quality sensor and an IR transmitter.
  
 
==Module view== <!--T:5-->
 
==Module view== <!--T:5-->
Line 37: Line 37:
 
<!--T:10-->
 
<!--T:10-->
 
{{ Mp
 
{{ Mp
−
| ctrlparams      = Humidity, lighting, movement,<br>temperature, CO2 (CW-CO2 only)
+
| ctrlparams      = Humidity, lighting, movement,<br>temperature, air quality sensor
 
| irangle        = 360°
 
| irangle        = 360°
 
| power          = 11.5 … 27.5 V DC from CAN
 
| power          = 11.5 … 27.5 V DC from CAN

Latest revision as of 11:07, 17 July 2025

Revision:
/B
/C


CW-HTMLI-II / CW-CO2.C1
CW-CO2 png.png
Sensors
Control parametersHumidity, lighting, movement,
temperature, air quality sensor
Angle of vision IR360°
Other
Supply voltage11.5...27.5 V DC
Dimentions85x85x35 mm


6 IN 1 SENSOR

This module contains motion, lighting, humidity, temperature, air quality sensor and an IR transmitter.

Module view

 

 

Motion detection area

 

Module parameters

Parameter name Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs
Number of dry contact inputs
RS485 ports qty
RS232 ports qty
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty
Output channels qty
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type
Supported sensors
Input voltage
Current type
Adjustment type
Max load
Min load
Max load per channel
Max load per group
Max load per device
Control parameters Humidity, lighting, movement,
temperature, air quality sensor
Angle of vision IR 360°
Angle of motion °
Temperature measuring range °C
Humidity measuring range
Dimmer type
Dimming type
Voltage that may be applied to the input channels
Max output switching voltage
Max output switching current
Power supply 11.5 … 27.5 V DC from CAN
Max current(24V) 100 mA
Max current(13V)
Max detection distance
Max IR distance
Max BT distance
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output
Sensors max VCC current
R1-R2 inputs max current
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length
Bus type CAN (4-wire)
Compatible with
Output voltage
Output current
Equipment installation type Wall, celling
Mounting
Max cabel lenght
Case material ABS
Protection IP40
Temperature range -10 … +50 °C
Size 85x85x35 mm
Weight 70g
* -
** -
*** -
1 -
2 -
3 -


HW settings

Name Type, range SUBID Default Description
offset float(+/- 0…39) SubID of sensor 0 sensor values offset (for temperature sensors) Example: 
1hw="offset='-3'"
scale float (0…8) SubID of sensor 1 multiplier determines the slope of values (except temperature sensors) Example: 
1hw="scale='1.1'"
pwr integer (1…100) SubID of IR-transmitter 50 Power of infrared transmitter signal. Example: 
1hw="pwr=50"

1<item addr="381:11" cfgid="63" name="IR transmitter" type="ir-transmitter" uniq_id="102"/>
2<item addr="381:30" cfgid="63" name="Motion" type="motion-sensor" uniq_id="103" hw="scale='3'"/>
3<item addr="381:31" cfgid="63" name="Illumination" type="illumination-sensor" uniq_id="104" hw="scale='0.4'"/>
4<item addr="381:32" cfgid="63" name="Temperature" type="temperature-sensor" uniq_id="105" hw="offset='10'"/>
5<item addr="381:33" cfgid="63" name="Humidity" type="humidity-sensor" uniq_id="106" hw="scale='5'"/>
6<item addr="381:98" cfgid="63" name="Temperature" system="yes" type="temperature-sensor" uniq_id="107"/>
Retrieved from "https://wiki.larnitech.com/index.php?title=CW-HTMLI-II_CW-CO2.C1&oldid=20593"