Changes
Jump to navigation
Jump to search
70 bytes added
, 09:08, 27 July 2021
Line 92: |
Line 92: |
| The nominal value of the circuit breaker should be calculated based on the maximum total load of connected | | The nominal value of the circuit breaker should be calculated based on the maximum total load of connected |
| devices and at the same time should not significantly exceed the maximum permissible characteristics of the actuator. | | devices and at the same time should not significantly exceed the maximum permissible characteristics of the actuator. |
− | Depending on the requirements, you can use one circuit breaker for one actuator (it is recommended) | + | Depending on the requirements, you can use one circuit breaker for one actuator (it is recommended, see Fig. 1) |
− | or one circuit breaker per each group of connected loads, or, if necessary, a separate circuit breaker can be installed | + | or one circuit breaker per each group of connected loads (see Fig. 2), or, if necessary, a separate circuit breaker can be installed |
− | for each load. | + | for each load (see Fig. 3)<br> |
| + | [[File:LC07Aexa1.png|500px]] |
| | | |
| ==Connection of actuators== | | ==Connection of actuators== |