Difference between revisions of "Translations:DW-HC08.A/20/ru"

From Larnitech wiki page
Jump to navigation Jump to search
(Created page with "==Indication of module operation== {{indicationold}} ==Порядок установки и подключения модуля==")
 
 
Line 1: Line 1:
==Indication of module operation==
+
==Индикация работы модуля==
 
{{indicationold}}
 
{{indicationold}}
 
==Порядок установки и подключения модуля==
 
==Порядок установки и подключения модуля==

Latest revision as of 12:35, 6 January 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (DW-HC08.A)
==Indication of module operation==
{{indicationold}}
==Module installation and connection procedure==
Translation==Индикация работы модуля==
{{indicationold}}
==Порядок установки и подключения модуля==

Индикация работы модуля

Indicator Status Description
Power Gl.png Power
E.png Power not available
Activity Y.png Data communication
E.png Data communication not available
Error E.png No errors
Rl.png Overheating
R.pngR.png No connection to AC.
R.pngR.pngR.pngDots.png The data has not been transferred via the CAN bus for at least 5 minutes.
R.pngR.pngR.pngDots.png No power on the lamp.
R.pngR.pngR.pngDots.png No power on the DALI bus or over current (more then 180 mA) on DALI bus. If over current is at both bus blinking twice in half a second.

Порядок установки и подключения модуля