Difference between revisions of "DW-WL02"

From Larnitech wiki page
Jump to navigation Jump to search
(Marked this version for translation)
 
Line 1: Line 1:
 
<languages/>
 
<languages/>
 
<translate>
 
<translate>
 +
<!--T:1-->
 
{{RevisionChanger | hasA = 1 | hasB = 1 | hasC = 1}}
 
{{RevisionChanger | hasA = 1 | hasB = 1 | hasC = 1}}
 
{{Infobox module
 
{{Infobox module
Line 16: Line 17:
 
}}
 
}}
  
−
==WATER LEAKAGE PROTECTION MODULE==
+
==WATER LEAKAGE PROTECTION MODULE== <!--T:2-->
  
 +
<!--T:3-->
 
The module supports the connection of 2 valves of water supply
 
The module supports the connection of 2 valves of water supply
 
shutoff and 4 leakage sensors (up to 16 FW-WL.B/EW-WL.B ).
 
shutoff and 4 leakage sensors (up to 16 FW-WL.B/EW-WL.B ).
  
−
==Features==
+
==Features== <!--T:4-->
 
*Supports 1p/2p valves
 
*Supports 1p/2p valves
 
*Valve feedback reed switch
 
*Valve feedback reed switch
Line 28: Line 30:
 
*Sensor sensitivity adjustment
 
*Sensor sensitivity adjustment
  
 +
<!--T:5-->
 
<div class="caution">
 
<div class="caution">
 
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
 
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
Line 44: Line 47:
 
</div>
 
</div>
  
−
==Overview==
+
==Overview== <!--T:6-->
  
 +
<!--T:7-->
 
[[File:WL02C VIEW.png|500px]]
 
[[File:WL02C VIEW.png|500px]]
 
<br>
 
<br>
Line 51: Line 55:
 
[[File:WL02C VIEW2.png|300px]]
 
[[File:WL02C VIEW2.png|300px]]
  
−
==Example of connection==
+
==Example of connection== <!--T:8-->
  
 +
<!--T:9-->
 
[[File:WL02C EXA.png|500px]]
 
[[File:WL02C EXA.png|500px]]
  
−
==Module dimensions==
+
==Module dimensions== <!--T:10-->
  
 +
<!--T:11-->
 
[[File:WL02C DIM.png|500px]]
 
[[File:WL02C DIM.png|500px]]
  
−
==Internal layout==
+
==Internal layout== <!--T:12-->
  
 +
<!--T:13-->
 
[[File:WL02C IL.png|500px]]
 
[[File:WL02C IL.png|500px]]
  
  
−
==Module parameters==
+
==Module parameters== <!--T:14-->
  
 +
<!--T:15-->
 
{{ Mp
 
{{ Mp
 
| outqty          = 4
 
| outqty          = 4
Line 88: Line 96:
 
}}
 
}}
  
−
==Indication of module operation==
+
==Indication of module operation== <!--T:16-->
 
===Bootloader===
 
===Bootloader===
 
{{indication| textBBB= Waiting for bootloader command}}
 
{{indication| textBBB= Waiting for bootloader command}}
Line 98: Line 106:
 
}}
 
}}
  
−
==Module installation and connection procedure==
+
==Module installation and connection procedure== <!--T:17-->
 
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
 
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
 
#Connect the CAN connector.
 
#Connect the CAN connector.
Line 106: Line 114:
 
#Check all equipment for proper operation.
 
#Check all equipment for proper operation.
  
−
==Module shut-off and deinstallation procedure==
+
==Module shut-off and deinstallation procedure== <!--T:18-->
 
#Disconnect the power from the load.
 
#Disconnect the power from the load.
 
#Disconnect the channels.
 
#Disconnect the channels.
Line 112: Line 120:
 
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
 
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
  
−
==HW settings==
+
==HW settings== <!--T:19-->
 
{|class="wikitable"
 
{|class="wikitable"
 
|-
 
|-

Latest revision as of 13:57, 6 January 2022

Other languages:
English • ‎русский
Revision:
/B
/C


DW-WL02.C
DW-WL02C.png
Output ports
Number of switched channels4
Peak load5A
Input ports
Number of sensor inputs4
Number of dry contact inputs2
Other
Supply voltage11.5...27.5 V DC
Dimentions4U, 69x110x58 mm


WATER LEAKAGE PROTECTION MODULE

The module supports the connection of 2 valves of water supply shutoff and 4 leakage sensors (up to 16 FW-WL.B/EW-WL.B ).

Features

  • Supports 1p/2p valves
  • Valve feedback reed switch
  • Support up to 16 leakage sensors
  • Sensor detection and diagnostics
  • Sensor sensitivity adjustment

CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment. To avoid the risk of fire, electric shock, damage to the system and/or personal injury, the system installation and assembly must be performed in accordance with the instructions listed below:

  • all connectivity work must be carried out with the power turned OFF;
  • use appropriate tools and personal protection against electric shock;
  • do not use damaged cables, wires and connectors;
  • avoid folding the cables and wires;
  • do not apply excessive force to the wires by kinking or pressing them too hard: the inner conductors of the cables and wires may get stripped or damaged;
  • do not use the power socket with poor contacts to connect;
  • do not exceed the load limit parameters specified in the manual;
  • the supply conductors wire section is subject to the specifications for current density limit, insulation type and wire material. Light section can result in cable overheating and fire.

When the power is on, NEVER:

  • connect/disconnect the connectors;
  • open modules and sensors.

Overview

WL02C VIEW.png

WL02C VIEW2.png

Example of connection

WL02C EXA.png

Module dimensions

WL02C DIM.png

Internal layout

WL02C IL.png


Module parameters

Parameter name Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs 4 FW-WL.A/EW-WL.A
16 FW-WL.B/EW-WL.B (4 per input)
Number of dry contact inputs 2
RS485 ports qty
RS232 ports qty
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty
Output channels qty 4
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type
Supported sensors
Input voltage 0-250 V AC/DC
Current type AC/DC
Adjustment type
Max load
Min load
Max load per channel 5A
Max load per group
Max load per device
Control parameters
Angle of vision IR °
Angle of motion °
Temperature measuring range °C
Humidity measuring range
Dimmer type
Dimming type
Voltage that may be applied to the input channels 0-250 V AC/DC
Max output switching voltage
Max output switching current
Power supply 11.5 … 27.5 V DC from CAN
Max current(24V) 60 mA
Max current(13V)
Max detection distance
Max IR distance
Max BT distance
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output 8..12 V
Sensors max VCC current 70 mA
R1-R2 inputs max current 3 mA
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length 30m
Bus type CAN (4-wire)
Compatible with
Output voltage
Output current
Equipment installation type DIN rail (EN 60715)
Mounting
Max cabel lenght
Case material ABS
Protection IP40
Temperature range -10 … +50 °C
Size 4U, 69x110x58 mm
Weight 100 g
* -
** -
*** -
1 -
2 -
3 -


Indication of module operation

Bootloader

Indicator Status Description
Top.png
 Yl.png Device in bootloader
Bot.png
 B.pngB.png Downloading firmware
R.pngR.png Flashing firmware

Firmware

Indicator Status Description
Top.png
G.pngG.pngG.pngDots.png Network configuration
B.pngB.pngB.pngDots.png Identification
Gl.png Operational mode
Yl.png Operational mode
Bot.png

Error
R.png Lost connection to server
R.pngR.png Overheat
R.pngR.pngR.png Overload
R.pngR.pngR.pngR.png No AC power
R.pngR.pngR.pngR.pngR.png RTC error
Bot.png

Activity
Y.png CAN activity
Bg.png OW activity
M.png RS-485 activity
B.png Ethernet activity


Module installation and connection procedure

  1. Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
  2. Connect the CAN connector.
  3. Connect the channels.
  4. Configure the module using LT setup.
  5. Apply power to the load.
  6. Check all equipment for proper operation.

Module shut-off and deinstallation procedure

  1. Disconnect the power from the load.
  2. Disconnect the channels.
  3. Disconnect the CAN connector.
  4. Remove the module from the DIN rail, releasing the latch at the bottom of the module base.

HW settings

Name Type, range SUBID Default Description
runtime integer 0-100 1-4 15 runtime is the open/close time in seconds, is used for jalousie, gate, valve(2 pole); Example: runtime=15
runtimeopen integer 0-60000 Blinds subId - Runtimeopen is the open time in milliseconds, is used for blinds; Example: runtimeopen=15000
runtimeclose integer 0-60000 Blinds subId - Runtimeclose is the close time in milliseconds, is used for blinds; Example: runtimeclose=15000
hold integer 0-10000 1-4 500 hold is the bridging time in miliseconds, is used for gate and jalousie (by default hold is the same as runtime), lock; Example: hold=3500
def string 'ON' 1-4 'OFF' Def is the element status is set after restart, is used for lamp, heating, valve(1 pole); Example: def='ON'
out char[4] 98 'V-V-' Each char is responsible for the type of a particular channel
  • 'L'-Lamp;
  • 'M'-Lamp Inverse;
  • 'J'-Heating NO, valve-heating, normally open;
  • 'H'-Heating NC, valve-heating, normally closed;
  • 'B'-Blinds (2 pole), jalousie/curtains;
  • 'C'-Blinds Inverse (2 pole), jalousie/curtains, invert open-close;
  • 'G'-Gate (2 pole), 2 pole gate;
  • 'D'-Gate (2 pole) Inverse, 2 pole gate, invert open-close;
  • 'X'-Gate (1 pole /short press), 1 pole gate;
  • 'Z'-Gate (1 pole) Inverse, 1 pole gate, invert open-close;
  • 'V'-Valve (2 pole), 2 pole valve;
  • 'W'-Valve (2 pole) Inverse, 2 pole valve, invert open-close;
  • 'R'-Valve (1 pole), 1 pole valve,;
  • 'S'-Valve (1 pole) Inverse, 1 pole valve, invert open-close;
  • 'K'-Lock (short press);
  • 'N'-Lock (short press) Inverse;
  • 'P'-Blinds (2 pole);
  • 'O'-Blinds Inverse (2 pole), invert open-close;
  • '-'-none, nothing is connected.

Example: out='V-V-'

leak char[4] 98 'LLLL' Each char is responsible for the type of a particular channel
  • 'L'-Leak, Built-in floor (EW-WL) or on-the-floor (FW-WL) leakage sensor
  • 'N'-Third party leakage sensor;
  • 'S' – Leak, on-the-floor (FW-WL.B) leakage sensor
  • '-'-none
in char[2] 98 'KK' Each char is responsible for the type of a particular channel
  • 'K' – Contact;
  • 'H' – Inverted contact;
  • '-' – none;

Example: in='HHKK' 

 1<item addr="500:1" cfgid="53" hw="runtime=30" name="Valve" type="valve" uniq_id="4105"/>
 2<item addr="500:3" cfgid="53" name="Jalousie" sub-type="120" type="jalousie" uniq_id="4117"/>
 3<item addr="500:11" cfgid="53" name="Leak" type="leak-sensor" uniq_id="4107"/>
 4<item addr="500:12" cfgid="53" name="Leak" type="leak-sensor" uniq_id="4108"/>
 5<item addr="500:13" cfgid="53" name="Leak" type="leak-sensor" uniq_id="4109"/>
 6<item addr="500:14" cfgid="53" name="Leak" type="leak-sensor" uniq_id="4110"/>
 7<item addr="500:21" cfgid="53" name="Door" type="door-sensor" uniq_id="4111"/>
 8<item addr="500:22" cfgid="53" name="Door" type="door-sensor" uniq_id="4112"/>
 9<item addr="500:23" cfgid="53" name="Door" type="door-sensor" uniq_id="4113"/>
10<item addr="500:24" cfgid="53" name="Door" type="door-sensor" uniq_id="4114"/>
11<item addr="500:97" cfgid="53" name="Temperature" system="yes" type="temperature-sensor" uniq_id="4115"/>
12<item addr="500:98" cfgid="53" hw="leak='NNLL' in='HHKK' out='V-B-'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="4116"/>
Retrieved from "https://wiki.larnitech.com/index.php?title=DW-WL02&oldid=5358"