Difference between revisions of "FW-FT"
Jump to navigation
Jump to search
(Created page with "{{Infobox module | name = FW-FT | image = FW-FT.png | cp = Temperature | temperature= -20 … +60°C | voltage = 11.5...27.5 V DC | dim = 8x8x50 m...") |
|||
Line 4: | Line 4: | ||
| cp = Temperature | | cp = Temperature | ||
| temperature= -20 … +60°C | | temperature= -20 … +60°C | ||
− | | voltage = | + | | voltage = 5 V DC |
| dim = 8x8x50 mm | | dim = 8x8x50 mm | ||
}} | }} | ||
Line 37: | Line 37: | ||
| smaxlen = 30 m* | | smaxlen = 30 m* | ||
| tscablen = 3m | | tscablen = 3m | ||
− | | protection = | + | | protection = IP65 |
| temprange = -20 … +60 °C | | temprange = -20 … +60 °C | ||
− | | size = | + | | size = 8x8x50 mm |
| weight = 15g | | weight = 15g | ||
| star1 = +5V and COM should be connected in one twisted pair, and DATA at free one | | star1 = +5V and COM should be connected in one twisted pair, and DATA at free one |
Revision as of 14:01, 17 August 2021
FW-FT | |||||||
---|---|---|---|---|---|---|---|
| |||||||
|
UNDERFLOOR HEATING TEMPERATURE SENSOR
This is an underfloor heating temperature sensor for DW-HCxx, it can also be used to measure the outdoor temperature.
Pin assignments
Example of connection
Example of connection
Module parameters
Parameter name | Value |
---|---|
Control parameters | Temperature |
Temperature measuring range | -20 … +60°C |
Power supply | 5 V DC |
Max current | 5 mA |
Sensor cable length | 3m |
Sensors line max length | 30 m* |
Bus type | One Wire |
Equipment installation type | Built into the floor/outdoor |
Case material | ABS |
Protection | IP65 |
Temperature range | -20 … +60 °C |
Size | 8x8x50 mm |
Weight | 15g |
* - +5V and COM should be connected in one twisted pair, and DATA at free one
HW settings
Name | Type, range | SUBID | Default | Description |
---|---|---|---|---|
offset | float (+/- 0…39) | SubID of sensor | 0 | sensor values offset (for temperature sensors) Example:
1hw="offset='-3'"
|