Difference between revisions of "Dimmer-lamp"
Jump to navigation
Jump to search
| Line 37: | Line 37: | ||
|} | |} | ||
| − | ==== | + | ====3-bytes==== |
{|class="wikitable" | {|class="wikitable" | ||
Revision as of 08:37, 19 August 2021
Example of description in XML
1<item addr="100:10" name="chandelier" type="dimer-lamp" auto-period="600" system="yes">
2 <linked addr="101:1"/> // is bound to the button with the address 101:1
3 <automation ……/> // set the automation for this element
4</item>
1<item addr="100:10" name="chandelier" type="dimer-lamp" auto-period="600" color-temp="307:4" color-white="307:5">
2 <linked addr="101:1"/> // is bound to the button with the address 101:1
3 <automation ……/> // set the automation for this element
4</item>
color-temp="dimmer ID:SUBID" – for adding and control dimmer brigtness bar with temperature.
color-white="dimmer ID:SUBID" – for adding and control dimmer brigtness bar "white".
Device status (2 bytes)
| Byte number | description |
|---|---|
| 0 | Device status. Bit 0: 0 – off 1 – on Bit 3: 0 – automation is disactivated 1 – automation is activated Bit 7: 0 – no alarm 1 – alarm (relating to temperature) |
| 1 | Brightness 0..250 |
Possible variants of setting the status
single-byte
| byte | description |
|---|---|
| 0 | Status (on/off) 0 – off 1 – on 0xFF – Change the status for the opposite one |
3-bytes
| byte | description |
|---|---|
| 0 | status (on/off) 0 – off 1 – on 0xFE – do not change the status of this byte 0xFF – Change the status for the opposite one |
| 1 | Brightness 0 – off 1..250 – brightness 0xFE – do not change the status of this byte |
| 2 | Time required for changing the status, seconds |