Difference between revisions of "FW-WL-BT/ru"
From Larnitech wiki page
Jump to navigation
Jump to search
|
|
| Line 10: |
Line 10: |
| | FW-WL-BT — беспроводной напольный датчик протечки со встроенным датчиком температуры. Работает по Bluetooth и питается от батарейки CR2450, провода не нужны. Внешне такой же, как [[FW-WL.A|FW-WL]]. | | FW-WL-BT — беспроводной напольный датчик протечки со встроенным датчиком температуры. Работает по Bluetooth и питается от батарейки CR2450, провода не нужны. Внешне такой же, как [[FW-WL.A|FW-WL]]. |
| | | | |
| − | The sensor is received by:
| + | Датчик принимают: |
| − | * [[BT-CAN]] module; | + | * модуль [[BT-CAN]]; |
| − | * [[DE-MG.plus]] controller. | + | * контроллер [[DE-MG.plus]]. |
| | | | |
| | ==Module parameters== | | ==Module parameters== |
Revision as of 12:57, 5 November 2026
| FW-WL-BT |
|---|
 |
|
| Control parameters | Протечка, температура |
|---|
|
|
| Supply voltage | Батарейка CR2450 |
|---|
|
БЕСПРОВОДНОЙ ДАТЧИК ПРОТЕЧКИ
FW-WL-BT — беспроводной напольный датчик протечки со встроенным датчиком температуры. Работает по Bluetooth и питается от батарейки CR2450, провода не нужны. Внешне такой же, как FW-WL.
Датчик принимают:
Module parameters
| Parameter name |
Value
|
| Input channels qty |
|
| Input/output channels qty |
|
| 0-10 input port quantity |
|
| Buttons |
|
| LED Buttons |
|
| Number of sensor inputs |
|
| Number of dry contact inputs |
|
| RS485 ports qty |
|
| RS232 ports qty |
|
| UART ports qty |
|
| M-BUS port quantity |
|
| Pulse inputs quantity |
|
| DALI ports qty |
|
| DALI-line voltage supply |
|
| Peak current of DALI-line power supply |
|
| Peak current in DALI-line |
|
| Maximum DALI devices quantity |
|
| Dimming channels qty |
|
| Output channels qty |
|
| 0-10 output port quantity |
|
| Analog output channels qty |
|
| Output |
|
| Digital line maximum length |
|
| Discrete input channels qty |
|
| Digital input channels qty |
|
| Speakers |
|
| Max power output audio channel |
|
| Camera |
|
| IR lighting |
|
| Card reader |
|
| Connection type |
|
| Protocols |
|
| Backlight voltage |
|
| Load type |
|
| Dimmer load type |
|
| Supported sensors |
|
| Input voltage |
|
| Current type |
|
| Adjustment type |
|
| Max load |
|
| Min load |
|
| Max load per channel |
|
| Max load per group |
|
| Max load per device |
|
| Control parameters |
Leakage, temperature
|
| Angle of vision IR |
°
|
| Angle of motion |
°
|
| Temperature measuring range |
°C
|
| Humidity measuring range |
|
| Dimmer type |
|
| Dimming type |
|
| Voltage that may be applied to the input channels |
|
| Max output switching voltage |
|
| Max output switching current |
|
| Power supply |
CR2450 battery
|
| Max current(24V) |
|
| Max current(13V) |
|
| Max detection distance |
|
| Max IR distance |
|
| Max BT distance |
|
| Max current |
|
| Relay |
|
| Data transfer speed |
|
| Permissible section of power supply cable to connect in socket: |
|
| Sensors VCC output |
|
| Sensors max VCC current |
|
| R1-R2 inputs max current |
|
| Push-button/reed switches line recommended length |
|
| Temperature sensor line max length |
|
| Sensor cable length |
|
| Sensors line max length |
|
| Bus type |
Bluetooth
|
| Compatible with |
BT-CAN
DE-MG.plus
|
| Output voltage |
|
| Output current |
|
| Equipment installation type |
Free
|
| Mounting |
|
| Max cabel lenght |
|
| Case material |
|
| Protection |
|
| Temperature range |
°C
|
| Size |
|
| Weight |
|
* -
** -
*** -
1 -
2 -
3 -