Template:Infobox module

{{Infobox module
| name          =  Module name
| image         =  Module image
| outCount      =  Number of switched channels
| dimmOut       =  Number of dimming channels
| peakl         =  Peak load (one-device)
| peakdl        =  Max load per dimming channel
| peakdlall     =  Max load per device
| dt            =  Dimmer type   
| inDisc        =  Number of discrete inputs
| inDigit       =  Number of digital inputs
| inSens        =  Number of sensor inputs
| inDry         =  Number of dry contact inputs
| inCount       =  Number of inputs
| inB           =  Number of buttons
| inLB          =  Number of LED buttons
| RS485         =  Number of RS485 ports
| RS232         =  Number of RS232 ports
| UART          =  Number of UART ports
| DALI          =  Number of DALI ports
| dts           =  Data transfer speed
| toc           =  Type of connection
| iointerfaces  =  Input/output interfaces
| maxcandev     =  Max CAN devices
| canportqty    =  CAN port qty
| canbuslength  =  Max CAN bus length
| maxcancurrent =  Max current per CAN bus
| voltage       =  Supply voltage
| dim           =  Module dimentions
| cp            = Control parameters
| ir            = Angle of vision IR
| motion        = Angle of motion
| temperature   = Temperature measuring range
| humidity      = Humidity measuring range
}}


<!--T:3-->
Template for using
{{Infobox module
| name          = 
| image         = 
| outCount      = 
| dimmOut       = 
| peakl         = 
| peakdl        = 
| peakdlall     = 
| dt            = 
| inDisc        = 
| inDigit       = 
| inSens        = 
| inDry         = 
| inCount       = 
| inB           = 
| inLB          = 
| RS485         = 
| RS232         = 
| UART          = 
| DALI          = 
| dts           = 
| toc           =
| iointerfaces  =
| maxcandev     =
| canportqty    =
| canbuslength  =
| maxcancurrent =
| voltage       = 
| dim           = 
| cp            = 
| ir            = 
| motion        = 
| temperature   = 
| humidity      = 
}}