Remote-control
From Larnitech wiki page
Jump to navigation
Jump to search
Example of description in XML
1<item addr="2048:10" name="TV" type="remote-control" sub-type="Samsung">
2 <remote-signal identifier="signal-power" transmitter-addr="210:12" value="196406...7F09FC"/>
3 <remote-signal identifier="signal-1" transmitter-addr="210:12" value="196406...7F09FC"/>
4 …..
5<remote-signal identifier="signal-ch-down" transmitter-addr="210:12" value="196406...7F09FC"/>
6</item>
Parameters
Name |
type and variety |
description |
default value
|
id |
number 2048 |
ID of the device where this element is located physically (always use 2048) |
2048
|
sub-type |
enum |
displayed remote control module (it should be specified in the interface) |
-
|
identifier |
enum |
remote control button identifier |
-
|
transmitter-addr |
ADDR |
IR signals transmitter address or address of another executor (script, interface etc.) |
-
|
value |
HEX |
Data sent by IR transmitter when activating the button |
-
|
string-value |
String |
Data sent to ADDR when activating the button |
-
|
In order to add the device IR-console to "Larnitech" application it is required
- Add to logic.xml file the device of remote-control type using LT Setup (Add remote control) or choose "Edit mode" in mobile app and press "Create remote" button from main menu.
- Activate the engineering mode in " Larnitech " app settings.
- In the device list find the remote control added from LT Setup and choose "Edit mode".
- In the window that appears select the IR-transmitter from which the IR-signals will be sent to the device (TV, DVD, Receiver).
- In the window that appears select the IR-receiver (gateway) for reading the IR-signals from the device remote control (TV, DVD, Receiver).
- Press the remote control button in "Larnitech" application, the countdown will start during which you are to send the IR-signal to the IR-receiver (gateway). The gateway will capture the signal and the button in "Larnitech" application will be activated.
- Set each the button of the device remote control as it is shown in paragraph No.6.