Авторизируйтесь в веб-панели инструментов администрирования системы «Умный дом» (LT Setup) и перейдите на страницу Обновления.Authorize yourself in the Web Toolbar of the Smart Home system administration (LT Setup) and go to the Updates page.
![Modbustcp1.png](/images/d/db/Modbustcp1.png)
В списке обновлений найдите iRidium и нажмите кнопку Обновить (если плагин не установлен, будет кнопка Установить – нажмите на нее).In the list of updates, find iRidium and click the Update button (if the plug-in is not installed, there will be the Install button – click it).
![Iridium2.png](/images/2/21/Iridium2.png)
Прочитайте предупреждение, поставьте галочку рядом с надписью «Я согласен и нажмите кнопку Начать обновление.Read the warning, tick the box next to “I agree” inscription and click the Start update button.
![Modbustcp3.png](/images/7/70/Modbustcp3.png)
После завершения обновления выберите страницу Плагины в разделе Общие' в левом меню.When the update is complete, select the Plugins page of the General section in the left menu.
![Modbustcp4.png](/images/9/97/Modbustcp4.png)
Найдите «API» в списке и нажмите «Настроить».Find API in the list and click Configure.
![Iridium5.png](/images/6/67/Iridium5.png)
Обратите внимание на значение в поле «Порт». Если он равен 8888, его нужно изменить, так как его использует сервер iRidium. Введите желаемое значение; нажмите «Сохранить» внизу экрана и «ОК» в следующем окне.Note the value in the Port field. If it is equal to 8888, you need to change it, since the iRidium server uses it. Enter the desired value; click Save at the bottom of the screen and OK in the next window.
![Iridium6.png](/images/7/7f/Iridium6.png)
![Iridium7.png](/images/6/64/Iridium7.png)
Вернитесь на страницу Плагины, найдите iRidium' в списке и нажмите Настроить.Go back to the Plugins page, find iRidium in the list and click Configure.
![Iridium8.png](/images/a/ae/Iridium8.png)
![Iridium9.png](/images/5/55/Iridium9.png)
В появившемся окне вы можете установить iRidium. Для этого выберите нужную версию (Pro или Lite) в поле Версия сервера и нажмите Установить.In the window that appears, you can install iRidium. To do this, select the required version (Pro or Lite) in the Server version field, and then click Install.
![Iridium10.png](/images/b/b4/Iridium10.png)
Появится окно с просьбой изменить адрес порта API, если его значение равно 8888 — эти действия описаны в шагах 4, 5 и 6. Если вы изменили адрес, нажмите «ОК».A window will appear asking you to change the API port address if its value is 8888 – these actions are described in steps 4, 5 and 6. If you have changed the address, click OK.
![Iridium11.png](/images/2/26/Iridium11.png)
На экране появится окно с надписью Installing, а затем окно с сообщением об успешной установке.A window with the “Installing” inscription will appear on the screen, and then a window with a message about the successful installation.
![Iridium12.png](/images/c/c9/Iridium12.png)
![Iridium13.png](/images/9/9b/Iridium13.png)
<liТеперь панель управления сервером iRidium появится в меню Настроить.>Now, the iRidium server control panel will appear in the Configure menu.
![Iridium14.png](/images/c/c8/Iridium14.png)
Кнопка «Сервер включен/Отключен» отмечена цифрой 1. Кнопка «Перезапустить сервер» отмечена цифрой 2.
Сообщение с установленной версией сервера находится под кнопками управления. Если вы хотите установить другую версию, выберите ее в поле с пометкой 3 и нажмите «Установить» (с пометкой 4)The Server enabled/Server disabled button is marked 1. The Restart server button is marked 2.
A message with the installed version of the server is located under the control buttons. If you want to install another version, select it in the field marked 3 and click Install (marked 4).