Translations:DW-DM06/26/en

HW settings

Name	Type, range	SUBID	Default	Description
dm	char[6]	98	'LLLLLL'	Each char is responsible for the type of a particular channel 'g' – use like halogen dimer-lamp 's' – Soft Switch, lamp, when on/off power is supplied/deenergised smoothly *(500msec) 'k' – Switch, lamp, when on/off power is supplied/deenergised immediately 'l' – LED Function, dimmable LED lamps 'v' – linear Function of dimming 'b' – blinds 'f' – fancoil '-' – Channel disabled '+' – Regular channel Example: dm='sk--l-'
def	integer 0-250	1-6	100	The default brightness level in case of a power reset (1..250). Example: def=250
min	integer 0-100	1-6	0	Minimum dimming level, example: min=10
max	integer 0-100	1-6	100	Maximum dimming level, example max=95
start	integer 0-100	1-6	0	The Start function is used for lamps that lack the minimal voltage to get turned on. If the set value is lower than the start value, the lamp is turned on at the start value and them the light is dimmed down to the set level. Example: start=60
force	integer 0-100	1-6	10	Time duration of the starting value (measured in milliseconds). Example: force=20
runtime	integer 0-60000	1-6	1000	Runtime is the speed of changing the brightness from 'min' to 'max' (measured in milliseconds). Example: runtime=1000