Translations:BW-DM/21/en

HW settings

Name	Type, range	SUBID	Default	Description
def	integer 0-250	1	100	The default brightness level in case of a power reset (1..250). Example: def=250
min	integer 0-100	1	0	Minimum dimming level, example: min=10
max	integer 0-100	1	100	Maximum dimming level, example max=95
start	integer 0-100	1	0	The Start function is used for lamps that lack the minimal voltage to get turned on. If the set value is lower than the start value, the lamp is turned on at the start value and them the light is dimmed down to the set level. Example: start=60
force	integer 0-100	1	10	Time duration of the starting value (measured in milliseconds). Example: force=20
runtime	integer 0-60000	1	1000	Runtime is the speed of changing the brightness from ‘min’ to ‘max’ (measured in milliseconds). Example: runtime=1000
protect	integer 0;1	1	0	Overload Protect. 0(off); 1 (on), example: protect=0
offset	float(+/- 0…39)	30	0	sensor values offset; For example, offset is -3.8 : 1hw="offset='-3.8'"
mode	string	98	disabled	Frequency of pulse-width modulation in Hz for item with direct current. dc100 – 100Hz dc200 – 200Hz dc400 – 400Hz dc800 – 800Hz Example: mode='dc400'
dm	char	98	'g'	Each char is responsible for the type of a particular channel 'g' – use like halogen dimmer-lamp 's' – Soft Switch, lamp, when on/off power is supplied/deenergised smoothly (500msec) 'k' – Switch, lamp, when on/off power is supplied/deenergised immediately 'l' – LED Function, dimmable LED lamps '-' – Channel disabled '+' – Regular channel Example: dm='s'
in	char[3]	98	'BBB'	Each char is responsible for the type of a particular channel 'B'-Button, a bell type; 'C'-Inverted button, inversebutton of a bell type (for normally-closed); 'D'-Backlit button, illuminated button; 'E'-Inverted backlit button, inverse illuminated button; 'S'-Switch, fixed switch; 'K'-Contact, reed contact; 'H'-Inverted contact, inversereed contact; '-'-none, nothing is connected. And you can also connect one temperature sensor: 1hw="in='T+-'" Example: in='BCB'