Translations:DW-HC08.A/21/en

From Larnitech wiki page
Jump to navigation Jump to search
  • Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
  • Connect the CAN connector.
  • Connect the X1-X3 connectors.
  • Configure the module using LT setup.
  • Apply power to the load.
  • Check all equipment for proper operation.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:DW-HC08.A/21/en&oldid=5172"