Translations:DW-RGB03/21/en

From Larnitech wiki page
Jump to navigation Jump to search

Module installation and connection procedure

  1. Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
  2. Connect the CAN connector.
  3. Connect the channels.
  4. Configure the module using LT setup.
  5. Apply power to the load.
  6. Check all equipment for proper operation.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:DW-RGB03/21/en&oldid=5250"