{{Infobox module
| name = Module name
| image = Module image
| outCount = Number of switched channels
| dimmOut = Number of dimming channels
| peakl = Peak load (one-device)
| peakdl = Max load per dimming channel
| dt = Dimmer type
| inDisc = Number of discrete inputs
| inDigit = Number of digital inputs
| inSens = Number of sensor inputs
| inDry = Number of dry contact inputs
| inCount = Number of inputs
| inB = Number of buttons
| inLB = Number of LED buttons
| RS485 = Number of RS485 ports
| RS232 = Number of RS232 ports
| UART = Number of UART ports
| DALI = Number of DALI ports
| dts = Data transfer speed
| toc = Type of connection
| iointerfaces = Input/output interfaces
| maxcandev = Max CAN devices
| canportqty = CAN port qty
| canbuslength = Max CAN bus length
| maxcancurrent = Max current per CAN bus
| voltage = Supply voltage
| dim = Module dimentions
| cp = Control parameters
| ir = Angle of vision IR
| motion = Angle of motion
| temperature = Temperature measuring range
| humidity = Humidity measuring range
}}
<!--T:3-->
Template for using
{{Infobox module
| name =
| image =
| outCount =
| dimmOut =
| peakl =
| peakdl =
| dt =
| inDisc =
| inDigit =
| inSens =
| inDry =
| inCount =
| inB =
| inLB =
| RS485 =
| RS232 =
| UART =
| DALI =
| dts =
| toc =
| iointerfaces =
| maxcandev =
| canportqty =
| canbuslength =
| maxcancurrent =
| voltage =
| dim =
| cp =
| ir =
| motion =
| temperature =
| humidity =
}}